TOA VX-200SZ Impedance Detection Module

226.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing impedance readings, and ground fault. Specification Power Source Supplied from VX-2000SF Current Consumption Under 150 mA Power […]

 

Read more

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing impedance readings, and ground fault.

Specification
Power Source Supplied from VX-2000SF
Current Consumption Under 150 mA
Power Amplifier Link RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241,
VP-2421 Power Amplifier.
Twisted-pair straight cable (TIA/EIA-568A standard)
External Attenuator Control Output Plug-in screw connector, relay, no-voltage make contact output,
transfer type, withstand voltage: 30 V DC, 250 V AC,
contact current: Under 7 A (DC), under 7 A (AC)
Applicable cable diameter: AWG 24 – AWG 16
Speaker Output Plug-in screw connector
Applicable cable diameter: AWG 24 – AWG 16
Power Amplifier Input Plug-in screw connector for connecting the VP-2064, VP-2122, VP-2241,
VP-2421 Power Amplifier.
Applicable cable diameter: AWG 24 – AWG 16
Fault Detection System Short circuit, open circuit (impedance detection method), ground fault
Finish Panel: Surface-treated steel plate
Dimensions 30.5 (W) × 132.6 (H) × 290.3 (D) mm
Weight 320 g
Accessory Plug-in screw terminal……1
Option Equaliser card: VX-200SE
Applicable Model VX-2000SF
Weight 0.32 kg

Reviews

There are no reviews yet.

Be the first to review “TOA VX-200SZ Impedance Detection Module”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA VX-200SZ Impedance Detection Module removeTOA RM-200M Remote Microphone Console removeJBL MTC 300T150 Transformer 70/100V removeTOA PGW-6R Music program selector removeINTER-M SC-624 2-CHANNEL SPEAKER LINE removeTOA AT-50UPR 50w volume control remove
NameTOA VX-200SZ Impedance Detection Module removeTOA RM-200M Remote Microphone Console removeJBL MTC 300T150 Transformer 70/100V removeTOA PGW-6R Music program selector removeINTER-M SC-624 2-CHANNEL SPEAKER LINE removeTOA AT-50UPR 50w volume control remove
Image
SKUVX-200SZRM-200MMTC 300T150PGW-6RSC-624AT-50UPR
Rating
Price 226.00 incl. GR VAT 492.47 incl. GR VAT 102.00 incl. GR VAT 78.14 incl. GR VAT 392.00 incl. GR VAT 79.95 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing impedance readings, and ground fault.

Specification
Power Source Supplied from VX-2000SF
Current Consumption Under 150 mA
Power Amplifier Link RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241,
VP-2421 Power Amplifier.
Twisted-pair straight cable (TIA/EIA-568A standard)
External Attenuator Control Output Plug-in screw connector, relay, no-voltage make contact output,
transfer type, withstand voltage: 30 V DC, 250 V AC,
contact current: Under 7 A (DC), under 7 A (AC)
Applicable cable diameter: AWG 24 - AWG 16
Speaker Output Plug-in screw connector
Applicable cable diameter: AWG 24 - AWG 16
Power Amplifier Input Plug-in screw connector for connecting the VP-2064, VP-2122, VP-2241,
VP-2421 Power Amplifier.
Applicable cable diameter: AWG 24 - AWG 16
Fault Detection System Short circuit, open circuit (impedance detection method), ground fault
Finish Panel: Surface-treated steel plate
Dimensions 30.5 (W) × 132.6 (H) × 290.3 (D) mm
Weight 320 g
Accessory Plug-in screw terminal……1
Option Equaliser card: VX-200SE
Applicable Model VX-2000SF
RM-200M - Five/ten zone console for VM-2120/2240 amplfiers The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers. These announcements can be made live or pre-recorded announcements can be activated. The remote microphone is connected by cable to the RM-210 Remote Microphone Extension unit. SPECIFICATIONS:
Power Requirement 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.)
Distortion Less than 1%
Frequency Response 100 - 10,000 Hz
Distortion Less than 1%
Signal-to-Noise Ratio More than 60 dB
Audio Output 0 dB*1, 600 O, balanced
Microphone Unidirectional electret condenser microphone, gooseneck type.
Speaker Zone Control Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast
Emergency Broadcast Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch
Voice Announcement Board Control Activation of 5 messages*2
Number of Connectable Units Up to 4
Communication System RS-485
Volume Control Microphone volume control
Connection Cable and Connector Category 5 STP cable, RJ45 connector
Communication Distance 800 m maximum in total
Finish ABS resin
Dimensions 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded)
*1 0 dB = 1 V *2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier.

The JBL MTC-300T150 150 Watt Transformer is intended for use with 70V or 100V distributed loudspeaker lines. It is ideally suited for the Control Series 300, especially the 300BB12 Backbox which includes a preinstalled mounting location.

Music Program Selector 1-6 with Relay
Toa - 100V installation

- IT CAN CHECK SPEAKER WIRE OPEN, SHORT, AND EXCEED VALUE ACCORDING TO SETTING UP IMPEDANCE.

- IT AUTOMATICALLY CHECKS SPEAKER WIRES BY PROGRAM TIMER OPERATIONS. THE POSSIBLE SET UP TIMES ARE BETWEEN 20 MINUTES AND 200 MINUTES.

- RS-232C TERMINAL IN/OUT CONTROL WITH AMX/CRESTRON INTERFACE.

- DC 24V OPERATION.

- COMPACT DESIGN 2RU(3.5”).

- KEEPS STORED VALUES BY NON VOLATILE MEMORY

- ALERT SOUNDS WHEN FAULT IS FOUND

- BUZZER ON/OFF FUNCTION.

SC - 624

Power source

24VDC

Power Consumption

300mA

Weight

5.2Kg / 11.5lb

Dimensions (WxHxD)

1482 x 88 x380mm /19 x 3.5 x 15in

The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor.

Weight0.32 kg3.00 kg1.80 kg0.50 kg5.20 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.32 kg
Weight 3.00 kg
Weight 1.80 kg
Weight 0.50 kg
Weight 5.20 kg
Weight 0.50 kg