Velodyne Impact 10 Sub Loudspeaker

With the down-firing port on the Impact-10, you get more bass output with less distortion than other companies' subwoofers that cost about the same. With its 250 Watts of amplifier power generating bass in the 32 Hz to 140 Hz spectrum, you get powerful output even in our entry-level subwoofer. Using the adjustable low-pass crossover frequency feature, you can blend the Impact-10 with your home theater satellites, gaming system or music speakers. The Impact-10's attractive black ash wood grain colored cabinet with black gloss trim complements your decor.


Features



Compact, stylish cabinet; high-value subwoofer

10" forward firing coated fiber woofer

Down-firing port minimizes distortion

2" copper-wound voice coils for exceptional reliability

"Green” MDP amp rated at 250 watts Dynamic power

User's Manual

Specifications

Dimensions | Metric :10-5/16” W x 15-3/4” D x 12-7/8” H | 26.2 x 40.0 x 32.7 cm
Driver Complement :One high-definition 8" woofer pressure coupled to one 8" low bass radiator.
Frequency Response :20 Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black; Matte White
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :Packaged individually or as part of ProCinema 800 system
Weight | Metric :26 lbs | 11.8 kg
Warranty :5 Years; 3 Years for Amplifiers

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)

Type     Advanced YST II and QD-Bass Subwoofer
Driver     25cm(10'') cone
Dynamic Power     250 W
Frequency Response     20-160 Hz
Advanced YST     Advanced YST II
QD-Bass Technology     Front-firing
High-Efficiency Power Amplifier     Yes
Linear Port     Yes
BASS (Bass Action Selector System)     Yes
Standby Power Consumption     0.3 W
Dimensions (W x H x D)     380 x 368 x 420 mm
Weight     18.5 kg

 Technical features    500W class 'D' power amplifier
Description    Active closed-box subwoofer system
Drive unit    1x f250mm (10 in) paper / Kevlar® cone long-throw
Frequency range    -6dB at 18Hz and 40/140Hz adjustable (EQ at A)
Frequency response    ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Power output:    500W
Rated power consumption:    94W
Input impedance:    33kΩ

Signal / noise:    >80dB
Functions:    Input Level (line in)

Input Level (speaker in)

Low-pass filter frequency

Low-pass filter bypass (line in only)

Bass extension

Bass roll-off alignment

Auto sense on/standby

Phase switch
Inputs:    Line In (RCA Phono)

Speaker Level In (Binding post)
Low-pass filter    Active 4th-order, variable cut-off frequency
Height:    325mm 12.8 in)
Width:    325mm (12.8 in)
Depth:    362mm (14.3 in)
Net weight    15.5kg (34.4 lb)
Cabinet    Gloss Black

AVAILABLE IN gloss black,wenge,rozenut COLORS