| Content | In the early 1980s, Wharfedale created the blueprint for modern ‘budget’ hi-fi speakers. Almost four decades on, Wharfedale again redefines the low-cost, high-performance speaker concept with the all-new range, the D300 Series.
Running concurrently with the existing Diamond 11 Series, attaining even lower price points, the D300 series has modishly styled enclosures incorporate many similar technologies, re-designed and engineered specifically for this new range. The drive units and bass reflex system are especially noteworthy – no other speaker range delivers such high specifications at such low prices.
Specifications:
General Description: 2.5-way floorstanding speaker
Enclosure Type: bass reflex
Transducer Complement: 2.5-way
Bass Driver: 5"(130mm),Black woven Kevlar cone
Midrange Driver: 5"(130mm),Black woven Kevlar cone
Full Range Driver: 1"(25mm) soft dome
Sensitivity (2.83v @ 1m): 88dB
Peak Power Handling: 25-120W
Peak SPL: 100dB
Nominal Impedance: 4Ω (compatible 8Ω )
Minimum Impedance: 4.1Ω
Frequency Response (+/-3dB): 40Hz ~ 20kHz
Bass Extension (-6dB): 37Hz
Crossover Frequency: 3.2kHz
Dimensions ( H x W x D ): (940+25) x 200 x (310+28)mm
Net Weight: 18.2kg/pcs |
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Driver Complements
Subwoofer 2 - 6" Diameter (15.24cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Ehanced Ring Radiator tweeter
Electrical
Overall Frequency Response 20Hz-40kHz 22Hz-40kHz
Lower -3dB Limit 38Hz dB 42Hz dB
Upper -3dB Limit 30kHz dB 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-300 w/channel 20-250 w/channel
Efficiency 88 dB 88 dB
Crossover Orth Crossover Orth Crossover
Crossover
(mid-high array) 3000Hz 2800Hz
Crossover
(subwoofer) 100HZ 100Hz
Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D
(129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D
(119.38cm H x 21.11cm W x 36.51cm D)
Footprint Size 10 1/2" W x 20 5/16" D
(26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D
(23.50cm W x 41.27cm D)
Mounting Options floor floor
Enclosure Type Sealed Sealed
Enclosure Type
(subwoofer) Dual PowerPort Dual PowerPort bass venting
Shipping/Other
Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs)
Shipping unit: each each
Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs)
Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser)
ALSO AVAILABLE IN "EBONY" COLOR
![]()
|
Twin Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 8" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Frequency Response: 28 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 118.6 dBA
Power Handling (RMS): 300 W
Recommended Amplifier Requirements (RMS): 100 - 300 W
Bass Alignment: Twin Ported HiVe II Technology
Sealed Mid-range TLE
Mid / H.F Crossover Frequency: 4000 Hz
Bass Low Pass Crossover Frequency: 550 Hz
Driver Unit Complement: 2 x 8" long throw RDT bass drivers
1 x 4" RDT mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth & Feet
(H x W x D): 1113 x 410 x 470 mm
(43 13/16 x 16 1/8 x 18 1/2)
Weight (each) including Plinth:
43.8Kg (96.4lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors]( "colors")
|
Single Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 6.5” long-throw RDT® bass drivers
1 x 4” RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available
Frequency Response: 35 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Rear Ported HiVe®II technology
Sealed Mid-range TLE®
Mid / H.F Crossover Frequency: 3600 Hz
Bass Low Pass Crossover Frequency: 600 Hz
Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm
(39 5/16 x 14 3/16 x 14 3/4 inches)
Weight (each) Including Plinth: 33Kg (72.7 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors]( "colors")
|
System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
![colors_01]( "colors_01")
|
Reviews
There are no reviews yet.