Content |
Signal distributor. 1 stereo input / 4 stereo outputs or 1 mono input / 8 mono outputs
This audio distributor is very useful to supply several audio devices with only one audio source. Its 2 operating modes allow to work with mono or stereo signals. Output level can be controlled independently.
WD 421 adapts itself to work with different impedances, ensuring that output signal level is at least equal to input signal level. It avoids any undesired attenuation and features a LED vumeter to visualize the input signal level.
Audio signal distributor with 2 inputs and 8 outputs. Two operating modes: 1 stereo input with 4 stereo outputs. 1 mono input with 8 mono outputs. Adjusting Output level. Balanced LINK output for interconnecting several units. Individual gain control of each channel
Inputs: 2 x XLR3 female balanced. Outputs: 8 x XLR3 male balanced. Input sensitivity: 0 dBu. Max. level input: 22 dBu. Input impedance: 10 kohm. Level range: ? to - 12dBu. Frequency response: 20 Hz to 22 kHz. Distortion: 110 dBu. Noise and hum: < - 80 dB @ 20 Hz - 22 kHz. Crosstalk: < - 80 dB @ 20 Hz - 22 kHz. Output impedance: 120ohm. Main supply: 110 - 120 V / 220 - 240 V 50/60 Hz. Power consumption: 20 W. Dimensions (WxHxD): 483 x 44 x 220 mm. Weight: 2.75 kg. | The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.
The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels. Features: - 1x6 Stereo Distribution Amp with Monitoring.
- 1 set of stereo (2) XLR inputs.
- 6 sets of stereo (2) XLR outputs.
- Input stage has LED level meter.
- Each output channel can be switched to mono.
- Each output channel can be individually monitored.
- Built-in headphone amp.
- Optional transformer balanced outputs.
- Electronically balanced inputs with individual left/right level controls.
- LED metering on input for balancing stereo material or two mono signals.
- Left / Right level controls on each output with a stereo / mono switch.
- Headphone jack to monitor output of selected channel.
- LED metering on output of selected channel.
- Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
- 1 unit rack space.
- Inputs and Outputs are balanced XLRs at +4dBu.
| Passive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.
- Each channel: Input: female XLR type
- Outputs: 1 parallel male XLR type, 2 transformer isolated male XLR type
- Nominal impedance for inputs/outputs: 200
- Max. input level: + 6 dBu
| Practical distributor with 1 input and 6 outputs
- Extends every mixer with additional outputs
- 1 stereo XLR input
- 6 stereo zone outputs (XLR)
- Each zone with level control and mono switch
- LED display of signal input and mono/stereo mode
- Rack installation with 1 U
- (19") 48.3 cm rack installation 1 U
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
7 W |
S/N ratio: |
>69 dB |
THD: |
<0.2 % at 1 kHz |
Power connection: |
Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) |
Impedance: |
Input 45.1 kOhm
Output 125 Ohm |
Gain: |
15 dB |
Max. level: |
Output: +22 dB
Input: +9 dBV |
Color: |
Silver |
Housing design: |
(19") 48.3 cm rack installation 1 U |
Dimension: |
Width: 48.3 cm
Depth: 12.6 cm
Height: 4.45 cm |
Weight: |
2.15 kg |
|
About the DI6s It's a fact of audio life that a lot of equipment that has to be connected to professional audio systems isn't impedance or level compatible. Interfaces Unlimited Tape/cassette/DVD/CD decks, audio for video, drum machines, synthesizers, bass guitars, computers; at some stage all these need linking up to Balanced inputs, whether the application is Live sound, Studio or Broadcast. To solve these problems, we've developed the DI-6s:
Six active D.I. (Direct Injection) boxes, plus a 6 into 1 Line Mixer, plus a 1 to 6 Splitter, All of this in a compact, all steel 1 RU package.
A Pro Audio Toolbox This unique and flexible audio toolbox allows Six independent unbalanced audio sources to easily and quietly interface with Balanced pro audio systems, either to individual channels or summed down to one Master output. But that's not all. By pressing a single switch on the rear panel the DI6s will change from being Direct Boxes and a Mixer to being a 6 way Splitter (line distribution amplifier). Now it will split an incoming signal to 6 individual outputs or zones. On the front panel, each channel has 2 IN/OUT jacks, a level control from infinity (off) through 0dB to +15dB gain, and a Clip indicator LED.The Master section has a Master volume control and status LEDs indicating whether the unit is in DI or Splitter mode. In addition, as on all ARX single rack unit equipment, each channel has a numbered marker panel ('scribble strip') you can write on for easy confirmation of channel assigns. Balanced Outputs On the rear, each channel has an XLR Balanced output, with associated Ground lift switch and status LED, to isolate the chassis and electronic grounds. The Master section has both Balanced XLR and Unbalanced Jack outputs. In addition there is a Balanced XLR input with a switch to put the unit in either DI or Splitter mode. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. With so many handy functions, plus a true 'user friendly' layout, it's no wonder people call the DI-6s 'A total Audio Patching System in 1 RU!' You'll never compromise on Quality when you choose ARX
Features Unique Pro Audio problem solver Six Direct boxes, Splitter and Line Mixer in one unit Multi mode unit: Six in, Six out; Six in, One out; One in, Six out Individual Output Ground lift switches Up to +15dB Gain available per channel Balanced XLR Outputs; High Impedance Jack Ins and Outs Flawless performance in any audio environment
T E C H N I C A L S P E C I F I C A T I O N S
Channels 1 - 6 High Z Input Impedance 2.2 Meg Ohm Max Channel Gain 15dB Clip LED Illuminates 1dB prior to clip Direct Output Impedance 300 ohms Balanced Max Input Level +20dB Max Output Level +21dB Signal to Noise -96dB(unity gain) Frequency Response 20Hz to 20KHz, ±0.5dB Distortion < 0.004%, 1KHz, +4dB Output Connector 3 pin XLR Master Section Output Impedance 300 Ohms Balanced Max Output Level +21dB Signal to Noise -90dB (unity gain) Frequency Response 10Hz to 20KHz, ±0.5dB Distortion < 0.004%, 1KHz, +4dB Output Connector 3 pin XLR Splitter Section Maximum Level + 20dB Input Impedance 20 KOhms, Balanced Input Connector XLR Frequency Response 10Hz?20KHz ±0.5dB AC Power 100-120, 220-240 V AC, 8 VA Size 19?W x 6?D x 1??H, 482 x 155 x 44mm Weight 2.2 Kg (5 lbs)
Front Panel Controls Hi Impedance (Hi Z) insulated jack Input and Output connectors Level control with up to +15dB of Gain available Clip LED indicator Marker panels for labelling DI assigns Master Level controls Rear Panel Balanced XLR Outputs Individual Audio Ground Lift switches and status LEDs XLR and jack Master Outputs XLR Input for splitter Splitter/DI + Mixer mode switch AC input connector, with voltage switch and fuse. |
iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?
With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.
? Advanced Feedback Suppression (AFS?)
? Type V? Noise Reduction
? PeakStopPlus? Limiting
? 2/3-octave Constant Q frequency bands
? Switchable boost/cut ranges of ±6 or ±15dB
? 18 dB per octave 40Hz low-cut filter
? ±12dB input gain range
? XLR, TRS and Euroblock Inputs and Outputs
? Internal Toroidal Transformer
? Frequency Response of 10Hz to 22kHz
? Dynamic range of greater than 113dB
? User Power Up Features
? Relay Bypass for Power Failure System Protection
|
Reviews
There are no reviews yet.