Content |
Yamaha Power Amplifier - XP1000 2 x 110-Watts, 8-Ohms Stereo, 100-Volt, High Sound Quality,
20Hz-20kHz, High Reliability and High Stability, Light Weight and Compact Design of 2U Size,
High-Pass Filter.
The XP power amplifier series featuring high power, high quality, high reliability and high stability
matches various installation sound systems and provides superior acoustic features even in live
performance applications. The series is equipped with various protection circuits including a circuit
for detecting power-on/off, output protection circuit and DC detection circuit. Various indicators
display the status of the protection system. Indicators include PROTECTION indicator, TEMP
indicator that shows overheating of the heat sink, POWER/STANDBY indicator that shows the
power status, as well as SIGNAL and CLIP indicators for each channel.
APPLICATIONS:
Live Performance
Churches
Halls
Banquet Rooms
Conference Rooms
Restaurants
5-model lineup ranging from 700W* output to 100W* output *(STEREO 8 ohms).
High sound quality equivalent to upper-class models with parts and emphasizing
on superior sound.
While realizing a design that ensures high sound quality, efficiency has been
planned down to the finest details for full achievement of both high-definition sound
and superior value.
Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology
EEEngine installed.
A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the
rear panel for compatibility with a wide variety of input levels.
Light weight and compact design of 2U size for installation in any location.
Monitor and remote terminals for monitoring and control from a remote location.
High-accuracy 1dB-step detented attenuator.
Various terminals and features suitable for professional use.
Special high-pass filter that enables change of cut-off frequency.
Equipped with various protection circuits, indicators and stepless low-noise fans.
Best matches with the digital mixing engine DME64N/24N and Installation series
speakers.
Output Power, 8? 100W+100W
S/N Ratio, 20Hz-20kHz 96dB
Idle Power Consumption 20 Watts
1/8 Power Consumption (4?/Pink noise) 170 Watts
Power Bandwidth (half power THD+N=0.5%) 10Hz-40kHz
THD+N 20Hz ? 20kHz, half power 0.1%
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response RL=8?, Po=1W,HPF=OFF 0dB
Channel Separation, Half power RL=8? 1kHz, ATT. Max input 600? shunt 70dB
Residual Noise Att. min, 20Hz-20kHz (DIN AUDIO) -70dBu
Damping Factor, 8?, f=1kHz 200
Voltage Gain, ATT. max 32dB or 26dB or +4dBu input sensitivity by select switch
Maximum Input Voltage +22dBu
Input Impedance 20k?(balance) 10k?(unbalance)
Controls, Front panel Power switch(push on/push off), attenuator(31position) x 2
Controls, Rear panel Mode switch(Stereo/Bridge/Parallel) x 1, HPF switch x 2,
Gain Select switch x 1
Connectors, Input XLR-3-31 type/ch, Euroblock connector(balance)/ch
Connectors, Output Speakon/ch, 5way binding post x 1
Connectors, Monitor/Remote Dsub15P x 1
Indicators Power/Standby x 1(Green/Orange), Signal x 2(Green), Clip/Limit x 2(Red)
Amplifier Protection Thermal: cut the output(heatsink temp ? 90°C) do not return
automatically
Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz
Weight 12kg (26.5 Ibs.)
Dimensions (W x H x D) 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16“)
|
- 2Χ350W 8Ω 2x500W 4Ω 2x650W STEREO MODE
- BRIDGE 2000W 4 Ω
- 16Kg
- 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
- Precise Power, Signal and Clip LEDs to monitor performance
- XLR and 1/4" TRS input connectors for compatibility with any source
- Professional speaker connectors and "touch-proof” binding posts support most speaker wiring systems
- Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
- Independent limiters per channel offer reliable protection against overload and distortion
- High-current toroidal transformer for ultra-high transient response and absolute reliability
- Ultra-reliable Toshiba/Fairchild power transistors
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- “Back-to-front” ventilation system including air filter for reliable operation
- “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
BASIC Series - Intelligent Power
BASIC - that's meeting the tightest budgets and professional requirements in reliability, flexibility and sound. Alone or in combination with the other products of the Bittner portfolio. The consequent realisation of the Bittner quality standards indicates once more our understanding of the contracting business. It underlines our philosophy that cost consciousness has nothing to do with giving up standards. Compromise is a word unknown to Bittner Audio! The incorporation of detent potentiometers, clip limiter, protection circuits for any imaginable situation, as well as a first-class production process using only highest-quality components made the BASIC series the choice of most contractors.
Certainly more than basic!
High Tech SMT design Excellent sound and superior impulse response Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay XLR Inputs Speakon and Binding Posts Clip Limiter Toroidal transformers LED Indicators for SIGNAL, CLIP, PROTECT, POWER Temperature controlled, variable speed, low noise fans Detent potentiometers Stereo / Bridged / Parallel Mode Ground Lift Robust Steel Chassis 3 Year Warranty
TECHNICAL DATA: Basic 400: 2x 200 W @ 4 Ohm Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.03% Signal-to-Noise Ratio: < -102 dB Channel Seperation: > 85 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Damping Factor: > 400 @ 4 Ohm Cooling: 2x Fan (temp. reg. variable speed) Weight: 12 kg. Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“) |
VLP Series Power Amplifier
Output Power:
- 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
- 300W RMS @ 8 Ohms, 1K Hz, 1% THD
Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
Slew Rate: 15V Per usec
Damping Factor @ 8 Ohm: 260
Impedance: 20 Ohms balanced / 10 Ohms unbalanced
Cooling System: 2 indivdual fans
Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift
Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)
Weight: 24 lbs. / 11Kgs.
Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift
|
- Rack mount stereo powered monitor speaker system
- New AES/EBU digital input
- lndependent MUTE function
- Sophisticated control panel section
- Ideal where space is at a premium
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications. - Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
- AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
- Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
- Independent MUTE function by holding down CH SEL key for a while.
- Auto Mute when powering on*.
- D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
- Multi-voltage power supply.
Speaker Section
- Unit: 110 x 40mm cone type, magnetically shielded, x 2
- Impedance: 8 ohms
- Output SPL: 84 dB/W (1m)
- Frequency response: 200Hz to 20kHz
Amplifier Section
- Rated output power: 10W or more (8 ohms, 1kHz)
- Residual noise: -60 dBV or less (DIN AUDIO)
- Distortion: 0.5% or less (10W / 4 ohms, 1kHz)
Digital input
- Connector: XLR-3-31 type
- Digital input Format: IEC60958 (AES/EBU)
- Digital inputSampling frequency: 44.1kHz to 96 kHz
Analog input
- Connector: XLR / 1/4" combi-jack
- Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
- Analog input Input impedance 10k ohms or more
Phones
- Connector: 1/4" stereo jack
- Applicable load imp. 8 ohms or more
- Rated output power 20mW + 20mW (32 ohms, 1kHz)
General
- External dimensions: 430(W) x 44(H) x 282(D) mm
- Weight: Approx. 3.5kg
- Power requirement: 100 - 240V~, 50/60Hz
- Power consumption: 10W
| L1400 450W-450W 4ohm (280W-280W8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation. |
Reviews
There are no reviews yet.