NEUTRIK NPPA-TT-SD50 ΠΕQΙΟ ΒΥΣΜ.1/8’2X48 4X50 D-SUB Patchbay

Product
Connector Type    Patch Panel
Electrical
Signal Type    Digital suitability acc. AES/EBU (3.072 Mb/s and 6.144 Mb/s)
Contact resistance     20 mΩ
Dielectric strength     1 kVdc
Frequencyrange    DC to > 50 MHz
Insulation resistance    > 1 GΩ
Channel separation    > 100 dB @ 10 kHz, 600 terminated
> 40 dB @ 6 MHz, 110 terminated
Mechanical
Insertion force    Withdrawal force    > 8 N
Lifetime    > 5000 mating cycles
Wiring    4 x 50 pole D-Sub
Locking device    Retention spring
Material
Contact plating    TRIBOR® (0.2 µm AuCo over 2 µm NiP) (Jacks)
Contacts    Bronze (CuSn6) (Jacks)
Shell    Steel and aluminium
Shell    PA 66 blend (Jacks)
Shell plating    Black
Front panel    AlMgSi0.5 F22
Environmental
Temperature range    -30 °C to +80 °C
Optical
Mobile Cables
Dimensions    482 x 44 mm (19'' x 1U)
Depth    178 mm (7'')
Channels    2 x 48 jacks, half normalled, 4 x 50 pole D-Sub, grounds are tied together

• Features 2x24 Neutrik NJ6TB-V long frame 1/4" TRS jacks acc. to BPO 316 / MIL-P-641/3
• Very robust and compact galvanized metal housing
• Eye catching channel identification through colored snap-on coding tabs
• 6 easily programmable switching configurations by jumpers
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• With high quality long life gold plated Neutrik jacks

Patch Panel with 2 x 24 TB (BP0316/MIL-P-642/2) jacks, programmable, push terminals, wire cross section: 0,08 . 0,5 mm² (AWG 28-20), stripping length: 5-6 mm (0,236in).

Design Criteria

The TB Patch Panel is a very robust and compactly designed Patch Panel for 19" rack mount (19" x 1U) with galvanized metal housing, a built-in cable bar on the rear for securing wires. There is a rear extension bar (NPP-S) available as an option for some panel types. On the front side we have an attractive additional lettering facility for each channel pair with a marking strip and individual snap-on colour coding plates. The NPP is easily programmable for six switching configurations and for changing the flexible grounding system. The panel has the high quality long life gold plated Neutrik NJ6TB-V Jack for the BPO / MIL style plugs.

Grounding

The flexible grounding system allows four possibilities to fit your needs:

Individual: Each channel ground is separately connected with the corresponding cable shield (default configuration). Group: Some channel grounds are PCB connected by making soldering joints on the PCB and by cutting tracks respectively to form a group that is connected to one common cable shield.

Central: All channel grounds are PCB connected by making soldering joints and wired with only one cable shield. Chassis-Common: Same as central grounding with additional connection of the common ground to the Patch Panel chassis by means of a jumper.

Features & Benefits

• Features 2x24 Neutrik NJ6TB-V long frame 1/4" TRS jacks acc. to BPO 316 / MIL-P-641/3
• Very robust and compact galvanized metal housing
• Eye catching channel identification through colored snap-on coding tabs
• 6 easily programmable switching configurations by jumpers
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• With high quality long life gold plated Neutrik jacks

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled,

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 solder terminals for fixed installations - cost effective, including top and bottom cover

Neutrik NPPA-TT-E56 Bantam Patchbay, 19“, programm able on the front“, high end connections, half normalled, 6x56 pin ELCO plugs, 1 unit

• Balanced jack sockets 6.3 mm
• Three switchable modes per channel: Normal (normalised), Half Normal (half normalised) and THRU (through-connected)
• Switch on the top of the patch bay for each channel for switching the modes
• Body shape: 19\" / 1 RU
• Dimensions (W x H x D): 483 x 45 x 93 mm
• Weight: 1.8 kg