Content |
The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.
These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.
- Receiving System: Double conversion superheterodyne
- RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
- Headphone Output Connector: 3.5 mm TRS stereo phone jack
- Headphones Output Power: 65 mW (at 32 ohms)
- Antenna Input: SMA-type, 50 ohms
- Aux. Input Connector: 3.5 mm TRS stereo phone jack
- Batteries: 2 x 1.5V AA (not included)
- Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
- Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
- Net Weight: 133 g (4.7 oz), without batteries
- Accessories Included: EP3 earphone; flexible antenna
|
The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V Power Source | AC mains (supplied AC adapter must be used) | Power Consumption | 250 mA (12 V DC) | Receiving Frequency | 636 - 865 MHz(*2), UHF | Channel Selectable | 64 selectable frequencies | Receiving System | Double super-heterodyne | Diversity System | Space diversity (true diversity) | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | Antenna Output | 75 Ω, BNC (Gain 0 dB) | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | Squelch Sensitivity | 18 - 40 dBμV variable | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | Tone Frequency | 32.768 kHz | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | Channel Check | Usable frequencies scanning | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | Harmonic Distortion | 1 % or less (typical) | Frequency Response | 100 Hz - 15 kHz, ±3 dB | Operating Temperature | -10 ℃ to +50 ℃ | Finish | Resin, black | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | Weight | 700 g | Accessory | AC adapter(*3) …1, Wireless antenna …2 | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units) |
|
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 15 W or less | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | Tone Squelch Frequency | 32.768 kHz | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | Frequency Response | 100 Hz - 12 kHz | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | Weight | 630 g (1.39 lb) (unit only) | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
True diversity receiver with all-metal case
Available in eight UHF bands 30 MHz wide each, with up to 1,200 selectable frequencies
Using several frequency bands allows up to 70 channels to be operated simultaneously.
Transmitter battery status monitoring and tone code squelch
Auto Setup, Environment Scan, and Rehearsal functions for quick and easy setup
Backlit, programmable color display and jog wheel with selectable warning signal for ease of use
Output for controlling external devices
-Theater, onstage miking
-Conferencing
-Houses of worship
-Live sound
-Sound/AV company
Carrier frequency range 500 to 530, 570 to 600, 650 to 680, 680 to 710, 720 to 750, 760 to 790, 790 to 820, 835 to 863 MHz
Audio bandwidth 35 to 20,000 Hz
THD 120 dB(A) typical
Modulation FM
Audio outputs balanced 3-pin XLR; unbalanced TS 1/4" jack; output level adjustable to -30, 0, +6 dB
Dimensions 200 x 44 x 190 mm (7.8 x 1.7 x 7.4 in.)
Net weight 972 g (2.2 lbs.)
|
The SR 400 diversity receiver is your best choice for cost-efficient, high-performance multichannel systems. Up to 12 channels* can be used simultaneously within the same subband and even large systems will work smoothly in environments hostile to RF transmission.
Being compatible with professional WMS 4000 antenna splitters, power supplies, and high quality antennas, the WMS 400 enables you to set up highly complex wireless systems. In Auto Setup mode, the receiver will scan the available bands, find an interference-free channel, and transmit the related frequency data to the assigned transmitter via infrared. This technique significantly reduces the time it takes to set up a multichannel system. A Rehearsal function identifying dead spots, a programmable display clearly indicating all important system parameters, twocolor display backlighting warning the user of critical conditions from a distance, and a transmitter battery status display on the receiver enhance reliability and add to ease of use.
Features:
* Integrated frequency scanner with frequency management database * Up to 12 channels can be used simultaneously in each subband * Infrared data transmission link * Rehearsal function for finding dead spots * Programmable warning functions using two-color display backlighting
Specifications:
* Carrier frequency range: 650 to 680, 680 to 710, 720 to 750, 760 to 790, 790 to 820, 835 to 862 MHz * Modulation: FM * Audio bandwidth: 35 to 20,000 Hz * THD: |
The wireless tuner WT-5805 is a PLL-synthesizer controlled double superheterodyne diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V Power Source | AC mains (supplied AC adapter must be used) | Power Consumption | 200 mA (12 V DC) | Receiving Frequency | 636 - 865 MHz(*2), UHF | Channel Selectable | 64 selectable frequencies | Receiving System | Double super-heterodyne | Diversity System | Space diversity | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | Squelch Sensitivity | 18 - 40 dBμV variable | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | Tone Frequency | 32.768 kHz | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | Channel Check | Usable frequencies scanning | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | Harmonic Distortion | 1 % or less (typical) | Frequency Response | 100 Hz - 15 kHz, ±3 dB | Operating Temperature | -10 ℃ to +50 ℃ | Finish | Resin, black | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | Weight | 700 g | Accessory | AC adapter(*3) …1, Wireless antenna …2 | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5805 unit)
MB-WT4 (for rack mounting two WT-5805 units) |
|
Reviews
There are no reviews yet.