| Content | The Behringer BA 19A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule and XLR connection, BA 19A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The BA 19A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure level.
Switch the Presence Filter and Change the Sound
The BA 19A features a switchable presence filter which allows you to tailor the sound characteristics to different sound requirements and styles. The filter is adjusted via a slide switch on the microphone with different positions to boosts the presence and to boost the joy.
Place It and You Won’t Ever Replace It
Place your Behringer BA 19A inside the kick drum and point towards the beater and you will capture the attack as you want it. You also can position the mic just inside the drum at the air hole, you will capture more weight and less attack. This is how you capture the best of both worlds.
Features:
Condenser boundary microphone for acoustic instruments
Frequency response for kick drums, piano and bass-heavy instruments
Integrated preamplifier for outstanding signal integrity
Half-cardioid polar pattern minimizes background noise and feedback
Switchable filters for stronger lows and high-frequency attack
Extremely high signal output which lets the sound cut through
Requires no external mounting
Impact-resistant carrying case included
Rugged, reliable metal construction
3-Year Warranty Program
Designed and engineered in Germany
Behringer BA 19A; Condenser boundary microphone for acoustic instruments; Frequency response for kick drums, piano and bass-heavy instruments; Integrated preamplifier for outstanding signal integrity; Half-cardioid polar pattern minimizes background noise and feedback; Switchable filters for stronger lows and high-frequency attack; Requires no external mounting; impact-resistant carrying case included; Frequency response 50 Hz to 18 kHz; Impedance 250 Ohms; Phantom Power 48V; Sensitivity -53 dB ±3 dB @ 1 kHz (1 V / Pa); weight 493 g |
Condenser
Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.
Recommended Uses
Conference/Installed
Available Options
MX396C/DUAL Dual-Element 0-180 Degrees, Cardioid, back or bottom exit cable, mute output, LED input
MX396/TRI Dual-Element 90-0-90 mic, adjustable to 120-120-120 degrees, Cardioid, back or bottom exit cable, mute output, LED input
The Microflex® Multi-Element Boundary microphone delivers a unique and versatile tool for conference room installations.
Clean and simple in appearance, Multi-Element Boundary mics come in two or three element configurations, combining the coverage of multiple microphones into one small, compact package.
|
With three cardioid condenser elements in a single housing, the phantom-powered U843R offers a remarkably versatile tool for surface-mount installations. Levers on the microphone base allow easy reorientation of two elements to offer 360° or 300° coverage. Since elements can be powered and used individually or in any combination, further flexibility is easily achieved. For example, with two elements powered, the microphone can provide a figure-of-eight polar pattern; with a single element powered, the microphone functions as a standard cardioid boundary microphone. Installation and repositioning are extremely quick, thanks to four recessed pathways on the base of the microphone that enable the user to route the cable as required to accommodate any installation requirements; no tools or disassembly are needed. The microphone also offers Audio-Technicaʼs innovative UniGuard® RFI-shielding technology.
- Three cardioid condenser elements mounted in a single housing
- Easily reposition two elements (via levers on the microphone base) to offer 360° or 300° coverage; each element can be powered and used individually or in any combination
- Also functions as a stereo boundary microphone
- Provides full, efficient and flexible coverage—fewer microphones required
- Small-diameter capsules near boundary eliminate phase distortion and deliver clear, high-output performance
- Low-frequency attenuation improves sound pickup without affecting voice quality
- Cable routes through any of four recessed pathways on the microphone base (or down for direct feed through a table surface); no tools or disassembly required
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Heavy die-cast case and non-slip silicone foam bottom pad minimizes coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Hemispherical Cardioid x3 (combine to omni-directional or bidirectional)
- Frequency Response: 70-16,000 Hz
- Open Circuit Sensitivity: –37 dB (14.1 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (Typical): 105 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Switch: The lever of elements can adjust the proper position
- Weight (Less Cable): 160 g
- Dimensions: 20.0 mm - height
85.0 mm – maximum body diameter - Cable: 7.6 m long (permanently attached to microphone), 4 mm diameter, 6 conductor, shielded cable; output end stripped and tinned for connection to electronic device
- Accessories Furnished: Soft protective pouch
|
MX393C - Condenser Boundary Microphone, Built-in Preamp, 12-ft Tini "QG" ? to XLR Cable, Programmable Switch and LED Indicator
|
SHURE MX-391/C Microphone BOUNDARY
Microflex Boundary There's never been smarter boundary microphones than the Microflex models from Shure. With many models to choose from, equipped with features like programmable, silent membrane switches, logic inputs and outputs, and LED indicators, Microflex Boundary microphones are the high-quality solution for a range of applications, such as altars, boardrooms and distance learning centers. Every Microflex Boundary microphone features one of the new interchangeable condenser cartridges. Available in cardioid, supercardioid and omnidirectional polar patterns, the Microflex cartridges give you superior Shure quality sound options for every installation. In addition, their programmable switches offer the flexibility to be set for Push to Talk, Push to Mute or Push On/Push Off modes. Attractively designed with a low profile, professional appearance, the Microflex Boundary microphones come with an easy to use paint mask for your custom-color installations. Find out why we call the new Microflex Boundary microphones "the smart choice" for just about every application. Take a listen today.
| Model | Description | | MX391/C - Cardioid | Miniature Black Condenser Boundary Microphone, In-Line Preamp, 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector | | MX391/S - Supercardioid | | MX391/O - Omnidirectional | | MX391/C - Cardioid | Miniature Black Condenser Boundary Microphone, 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector, MX1BP Preamplifier | | MX391/S - Supercardioid | | MX391/O - Omnidirectional | | MX391LP/C - Cardioid | Miniature Black Condenser Boundary Microphone (Wireless Compatible), 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector Less Preamplifier | | MX391LP/S - Supercardioid | | MX391LP/O - Omnidirectional | | MX391WLP/C - Cardioid | Miniature White Condenser (Wireless Compatible) Boundary Microphone, 12 foot Attached Cable to 4-Pin Mini Connector, Less Preamplifier | | MX391WLP/S - Supercardioid | | MX391WLP/O - Omnidirectional | | MX391W/C - Cardioid | Miniature White Condenser Boundary Microphone, 12 foot (4 meter) Attached Cable to 4-Pin Mini Connector, In-Line Preamplifier | | MX391W/S - Supercardioid | | MX391W/O - Omnidirectional | | MX392/C - Cardioid | Condenser Boundary Microphone, Built-in Preamp, Attached 12 foot (4 meter) Unterminated Cable, Logic Functions, Programmable Switch and LED Indicator | | MX392/S - Supercardioid | | MX392/O - Omnidirectional | | MX393/C - Cardioid | Condenser Boundary Microphone, Built-in Preamp, 12 foot (4 meter) 3-Pin Mini Connector (TA3F) to male XLR, Programmable Switch and LED Indicator |
|
The e 912 is a pre-polarized condenser boundary microphone with
half-cardioid pick-up pattern. Its acoustic properties have been
optimized for instruments, vocals and speech. The e 912 is an ideal
choice for pianos, theatre and opera productions, conference applications,
altars and lecterns.To optimally match the installation environment,
the e 912 is available in black or creme white.
Features
Frequency response and sensitivity optimized for picking up instruments,
vocals and speech
Unobtrusive, flat housing
Extremely rugged and step-resistant
Shock-absorbing rubber base
Mounting slots for table installation
Gold-plated XLR connector
Integrated pre-amp
Delivery Includes
e 912 Microphone
Pouch
User manual
Technical Data
Transducer principle (Microphone) permanently polarized condenser
Pick-up pattern half-cardioid
Sensitivity in free field, no load (1kHz) 10 mV/Pa
Max. Sound pressure level (aktiv) 135,6 dB
Equivalent noise level 26 dB(A)
Phantom powering 48 V / 1,1 mA
Nominal impedance
Min. terminating impedance 1000 Ohm
Dimensions 126,5 x 105 x 26,5 mm
Weight ca. 550 g
|
Reviews
There are no reviews yet.