| Content |
The Yeti is one of the most advanced and versatile multi-pattern USB microphones available anywhere. Combining three capsules and four different pattern settings, the Yeti is an ultimate tool for creating amazing recordings, directly to your computer. With exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue's innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone. There are no drivers to install - simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
MICROPHONE AND PERFORMANCE
Power Required/Consumption: 5V 150mA
Sample Rate: 48 kHz
Bit Rate: 16bit
Capsules: 3 Blue-proprietary 14mm condenser capsules
Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
Frequency Response: 20Hz - 20kHz
Max SPL: 120dB (THD: 0.5% 1kHz)
Headphone Amplifier
Impedance:16 ohms
Power Output (RMS): 130 mW
THD: 0.009%
Frequency Response: 15 Hz - 22 kHz
Signal to Noise: 100dB
Specifications
Dimensions (extended in stand): 4.72" (12cm) x 4.92“(12.5cm) x 11.61“(29.5cm)
Weight (microphone): 1.2 lbs (.55 kg)
Weight (stand): 2.2 lbs (1 kg)
System Requirements
PC: Windows 8, Windows 7, Windows Vista, XP Home Edition or XP Professional
USB 1.1/2.0; 64 MB RAM (minimum)
Macintosh: Mac OSX ( 10.4.11 or higher )
USB 1.1/2.0
64 MB RAM (minimum)
| SUM40 USB condenser microphone
- Uses: Music recording, voice-over, podcasting
- Capsule: Condenser
- Polar pattern: Cardioid
- Sensitivity: - 53 dB +/- 3 dB
- Frequency response: 50 Hz to 18 kHz
- Maximum sound pressure level: 75 dB
- Compatibility: Windows and Mac OS X, without additional driver
- Connector: Type B USB
- Headphone output: 3.5 mm (1/8“) mini jack
- Colour: Black
This USB back electret condenser microphone is perfect for musicians needing to record vocals and instruments alike. This clear and precise sounding mic features smooth frequency response.
Polar Chart:Cardioid |
AKG Podcaster Essentials, includes everything you need to get professional quality audio for your podcasts or videos, including an AKG Lyra Ultra-HD multimode USB microphone and the AKG K371 professional closed-back headphones. Lyra has four selectable capture modes—Front, Front + Back, Tight Stereo and Wide Stereo—making it capable of capturing audio in a variety of applications and up to 24-bit/192kHz high-resolution audio. AKG K371 professional studio headphones combine performance, accuracy and supreme comfort in a compact, folding design that’s ideal for production in the studio or on location. K371s are precision-engineered to match AKG’s
Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail.
The package includes: 1 x USB-C to USB-A cable, 1 x 1.2 m (2.5) straight headphone cable, 1 x 3.0 m (9.8) straight headphone cable, 1 x 3.0 m (9.8) coiled headphone cable, 1 x 3.5 mm (1/8/") to 6.5 mm (1/4/") headphone adapter, 1 x Dual-headphone adapter (supports two headphone connections), 1 x Protective headphone carrying pouch
Specifications (Microphone)
- Type: Condenser
- Polar Pattern: Front, Front & Back, Tight Stereo and Wide Stereo
- Frequency Response: 20 to 20,000 Hz
- Microphone Bit Depth/Sample Rate: 24-bit/192 kHz
- Max SPL: 129 dB SPL (0.5% THD)
- Microphone Power Requirement / Consumption: 5V USB / 75 mA
- Output Connection: USB 2.0
- Headphone Output Impedance: 16Ω
- Headphone Power Output (RMS): 43 mW
- Headphone Frequency Response: 20 Hz – 22 kHz
- Microphone Headphone Output S/N Ratio: 98.0dB
Specification (Headphones)
- Headphone Type: Closed Back
- Driver Size: 50mm
- Voice Coil: Pure OFC voice coil
- Frequency Response: 5 Hz – 40 kHz
- Sensitivity (SPL): 114 dB SPL/V @ 1 kHz
- Impedance: 32 ohms
- Weight: 255g
| The new AT2020 USB offers studio-quality articulation and intelligibility. It plugs right into your computer's USB port, and functions seamlessly with your favorite recording software. Equipped with a USB digital output, the AT2020 USB is perfect for home studio recording, field recording, podcasting, and voiceover use.
Based on the renowned AT2020
The AT2020 USB is based on the design of Audio-Technica's critically acclaimed AT2020 cardioid condenser microphone. Like the AT2020, it features a low-mass diaphragm, custom-engineered for extended frequency response and superior transient response.
With low self-noise, the AT2020 USB is perfectly suited for sophisticated digital recording equipment. Audio-Technica's state-of-the-art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.
Experience AT2020 USB. Plug it in and transform your sound.
- Side-address studio condenser with USB digital output (Windows and Mac compatible)
- Crystal-clear, natural sound for podcasting, home studio recording, field recording, and voiceover use
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Low self-noise - perfectly suited for sophisticated digital recording equipment
- Includes tripod desk stand, pivoting stand mount, USB cable & storage pouch
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-16,000 Hz
- Weight: 13.2 oz (374 g)
- Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
- Output Connector: USB-type
- Accessories: Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
|
The Audio-Technica Consumer ATR4650-USB is a compact USB microphone that can be clipped on clothing or mounted to a surface such as a monitor frame making it ideal for vloggers, YouTubers, and live streamers. With its USB Type-C cable and USB Type-A adapter, it conveniently works with USB-equipped smartphones, tablets, and computers.
Operation is simple and straightforward thanks to its plug-and-play compatibility and USB powering. The 6' attached cable allows plenty of slack for you to maintain sufficient distance between the mic and your device. The condenser element's omnidirectional polar pattern picks up sound from all directions, so you don't have to worry about precisely angling the mic.
- Utility USB microphone for computer applications
- Easily portable boundary mic plugs into USB input on a computer, tablet, smartphone or other device
- 1.8 m (6') cable is terminated with USB-C connector, and comes with USB-C to USB-A adapter
- Slim-profile mount for easy attachment to flat-panel monitor or other surface
- Integral clothing clip enables use as a lapel microphone
- Omnidirectional pickup pattern offers full 360° coverage
Microphone
Element : Condenser
Polar Pattern : Omnidirectional
Freq response : 50 - 13,000 Hz
Open circuit sensitivity : -48 dB
Power Requirement : 5v DC
| The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
|
Reviews
There are no reviews yet.