Content |
Ultimate Rock Tone 120-Watt 2-Channel Tube Amplifier Head with Reverb and INFINIUM Tube Life Multiplier
- Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
- 2-channel preamp design (Clean/Crunch, Lead) featuring 6 x 12AX7 tubes for thick and screaming hi-gain
- Revolutionary INFINIUM Tube Life Multiplier technology:
- Extends the life of your amplifierʼs expensive power tubes up to 20 times
- Provides incredible reliability and consistent tone over the complete lifespan of your tubes
- No need for expensive matched tube sets
- Allows you to mix and match any combination of compatible tube types and brands
- Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
- Integrated high-class reverb with dedicated Reverb control for each channel
- Independent Equalizer sections for each channel with dedicated Bass, Mid and Treble controls
- Classic Presence control per channel for efficient midrange sound shaping
- Heavy-duty footswitch for Channel selection and FX Loop function included
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
The JVM Series 100-watt, valve-driven power stage is built on the classic design responsible for the legendary Marshall roar found in the JCM800, 2203 and "plexi" Super Lead amplifiers -- a timeless foundation for countless classic rock and metal guitar tones for over 4 decades. Featuring a quartet of EL34 valves, this peerless design has been expertly crafted to compliment the extraorinary wealth of tones found in the JVM.
Technical Info
Type: Head
Output (RMS): 100 watts
Channels: 4
Modes per Channel: 3
Independent Gain and Volume (per Ch): Yes
Independent Tone Network (per Ch): Yes
Independent Reverb Level (per Ch): Yes
Dual Programming Master Volumes: Yes
Silent Recording: Yes
Emulated Line Out XLR: Yes
Series FX Loop: Yes
Programmable Parallel/Series FX Loop: Yes
MIDI Presets: 128
Pre-Amp Valves: 4XECC83
Power Amp Valves: 1X ECC83, 4XEL34
6-way Programmable Footcontroller (Supplied) PEDL-00044
Dimensions (mm): 750 x 310 x 215
Weight (KG): 22
Speakers: No
|
Marshall 2245-01 30W Guitar Amplifier
When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.
Model Name | JTM45 (2245) | Series | Vintage Reissue | Tubes | 3 ECC83 (Preamp), 2 5881 (Power Amp) | Output | 30 Watts | OHMS | 16 | Speakers | n/a | Effects | n/a | Covering | Black Vinyl | Footswitch | n/a | Dimensions | 660x260x205mm | Weight | 14.6kg |
| The first high gain amp in the Terror series, the Dark Terror is a true master of saturated distortion, making it an ideal match for Hard Rock players looking for signature Orange ʽchugʼ in a portable package. Featuring the same 15/7 Watt output section as the Tiny Terror, plus the addition of our low impedance, valve buffered effects loop, the key to the amp its high gain preamp section and our exclusive Shape control.
The Shape, which first appeared on our Thunderverb Series, takes your sound from scooped, chunky modern rhythm tones in the fully clockwise position, to a more classic voicing (anticlockwise) with boosted mids and smooth highs, and everywhere in-between. This makes the amp much more versatile than its single channel, three knob layout (and black chassis!) might suggest. The preamp features four stages of gain, becoming increasingly aggressive as you turn the Gain control, reaching truly insane levels of drive. Ignore the clean and crunch tones at your peril, though. There are some tasty Blues tones to be had here! |
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
|
- Extremely small all-tube guitar amplifier head
- NORMAL/TOP BOOST channel select
- THIN/MELLOW tone control
- GAIN and VOLUME controls
- 8Ω/16Ω speaker out select
- Full metal construction
Power:
| 5W | Channels: | 1 | Equalizer: | - | Inputs: | 1 | Outputs: | 2 | Effects: | - | Valves: | Yes | Foot-switch: | - | Controls: | Thin, Mellow, Gain, Volume | FX Loop: | - | Dimensions ( W x H x D ): | -
120mm (d) x 193mm (w) x 105mm (h)
| Weight: | -
2,55kg
|
|
Reviews
There are no reviews yet.