| Content |
RedNet X2P is a compact, portable and robust 2x2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable simply use a power over Ethernet switch or PoE injector. A local input mixer allows \'more me\' monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.
Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite\'s acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs. |
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
Mbox® is a premium audio interface, packing a wide range of analog and digital I/O connections into a mobile form factor.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* Bus-powered USB 2.0 connection for maximum mobility
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 96 kHz sample rates
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Hardware configuration:
o 4 x 4 simultaneous channels of I/O
o 2 XLR mic/line combo inputs with 48 V phantom power
o 2 1/4” DI inputs on front panel for easy access
o 2 balanced 1/4” monitor outputs
o 1 1/4” stereo headphone output with volume control
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Monitor control section with Mono and Dim controls
o Dedicated monitor volume knob
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools® software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One USB port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One USB port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers ![]( "MBOX")
|
Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.
The 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8pres or other MOTU FireWire audio interfaces.
The 8pre as your primary audio interface
Use the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8preʼs main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.
The 8pre includes a 16-channel MIDI interface. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.
The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
The 8pre as a microphone preamp expansion interface
The 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical "lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD or Traveler, the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.
If you have a 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.
| GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
- Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
- Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
- Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
- Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
- Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
- Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
- Powered via USB—no additional power supply required
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector.
Super Software
The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software.
You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program.
This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx. |
The Yamaha GO44 is a mobile audio solution that features high quality line
inputs/outputs and worldclass MIDI and audio recording software enabling
professional quality recording to a computer in a very compact package that
can be carried and used virtually anyway.
The Yamaha GO44 boasts up to 24-bit/192kHz resolution on the analog inputs/
outputs - the best in its class - and 24-bit/96kHz on the digital I/O. This pro-level
quality makes the Yamaha GO44 perfect for any type of recording, and allows
you to capture the full details and nuances of the original source - from the
breathiness of a vocal to the delicate finger slides of an acoustic guitar performance.
The Yamaha GO44 features 4-in/4-out multi-channel audio, with two analog phone
jack terminals for both input and output, and special S/P DIF coaxial terminals for
two-channel digital in/out. This device is simple and easy to use, yet provides high-quality
recording capability - perfect not only for those who want to create music, but also
for those who want an audio playback system for their computer that delivers
outstanding sound quality.
The digital outputs on the Yamaha GO44 are compatible with the AC-3 and DTS
surround sound formats. Simply connect a surround compatible amplifier/speaker
setup, and enjoy the powerful sonic experience of surround sound.
Yamaha GO44 Features:
FireWire audio interface
Durable aluminum die cast body
Simple, small and light weight
2 x Balanced Line inputs / outputs
Headphones output on Front Panel
1 MIDI In /1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
|
Reviews
There are no reviews yet.