Content |
Info
NT50H-G2 Features: - Output Power: 50 Watts RMS into 8Ω or 16Ω. - Tube Complement: Preamp: 12AX7 (x3) Power amp: EL34 (x2) - Inputs/Outputs: Guitar input, FX Loop (Send/Return), D.I. Out, Foot switch, 1 x Speaker output (16 Ω), 1 x Speaker output (8 Ω) / 2 x Speaker output (16Ω). - Controls: Master Volume, BRIGHT/GIRTH channel switch, Reverb, Tone Cut, THICK switch, GIRTH channel ? ?Volume, Bass, Middle, Treble, Gain?, BRIGHT channel - ?Bass, Middle, Treble, Gain?, THICK. - Dimensions (W x D x H): 450 x 165 x 215 mm / 17.72 x 6.50 x 8.46 inches. - Weight: 12.2 kg / 26.90 lbs. - Options: VFS2A footswitch. - Accessories: Power cable, High Performance VOX Custom Speaker Cable (16AWG).
|
Get ready to experience a whole new level of tone creation. THR100H Dual packs true dual-amp functionality into a single 5kg package. Both amps feature five custom-voiced amp types with natural, organic overdrive, Yamahaʼs new ultra-dynamic power amp with selectable output tube simulations and selectable class A or A/B topology, independently assignable boosters, reverbs and IR speaker simulators, as well as selectable single or true dual-discrete inputs for genuine dual-path connectivity.
Power: | Single Amp: 100W (8/16Ω) 50W (4Ω), Dual Amp: 100W (50W+50W) | Channels: | 1 | Equalizer: | Yes | Inputs: | INPUT I (1/4" Phone), INPUT II (1/4" Phone) | Outputs: | PHONES (1/8" Mini Stereo), FOOTSWITCH (5pin DIN), EFFECT LOOP SEND/RETURN (Stereo 1/4" Phone), SPEAKER OUT 1 (1/4" Phone), SPEAKER OUT 2 (1/4" Phone), LINE OUT I (XLR), LINE OUT II (XLR), AC IN Jack | Effects: | BOOSTER (*White/Amber/Green), REVERB (*Hall/Room/Plate/Spring), NOISE GATE (*OFF/1/2/3), FX LOOP (*PARALLEL/SERIAL), SPEAKER SIMULATION (*Impulse Response) *Only selectable in the THR HD_H Utiity | Valves: | EL34, 6L6GC, KT88, EL84, 6V6 | Foot-switch: | Yes ( Optional ) | Controls: | POWER, AMP SELECT, BOOSTER x2, AMP TYPE, BOOSTER, GAIN, MASTER, BASS, MIDDLE, TREBLE, PRESENCE, REVERB, LEVEL | FX Loop: | Yes | Dimensions ( W x H x D ): | 44,5 χ 24,8 χ 12,5 cm | Weight: | 4,1 kg |
|
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
| Palmer EINS - Amazingly versatile!
Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.
The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.
- 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
- 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
- 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
- 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.
- Type: head
- technology: Tube
- class: A
- power: 1 W
- Inputs: 1
- input connectors: 6.3 mm Jack
- Input impedance: 1 M ohm
- outputs: 4
- output connectors: 6.3 mm Jack
- output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
- Channels: 1
- Indicators: Power
- controls: Level, Tone
- FX loop: no
- Power supply: 230 VAC
- Power consumption: 10 W
- preamp tubes: ECC83
- power amp tubes: ECC82
- rectifier: solid state
- cabinet material: sheet steel
- Cabinet / Housing surface: powder coated / anodized
- width: 206 mm
- depth: 128 mm
- height: 108 mm
|
100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.
Features - Power rating: 100W
- Preamp: Digital Natural Harmonic Technology
- Power amp tubes: 4 x EL34
- Preamp topologies: 16
- Modulation effects: Chorus, Phaser, Flanger, Tremolo
- Delay effects: Hi-Fi Analog, Tape, Multi
- Reverb: Independent custom voiced
- Midi Control: Midi in, Midi Thru
- Stompware controller: supplied
- Emulated line out: XLR
- Headphone out: 1/4" jack
- Line in: 1/4" jack
- Preamp: 1/4" jack
- Effects loop: Serial / Parallel -10dBV / +4dB with mix control
- Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
|
- Extremely small all-tube guitar amplifier head
- NORMAL/TOP BOOST channel select
- THIN/MELLOW tone control
- GAIN and VOLUME controls
- 8Ω/16Ω speaker out select
- Full metal construction
Power:
| 5W | Channels: | 1 | Equalizer: | - | Inputs: | 1 | Outputs: | 2 | Effects: | - | Valves: | Yes | Foot-switch: | - | Controls: | Thin, Mellow, Gain, Volume | FX Loop: | - | Dimensions ( W x H x D ): | -
120mm (d) x 193mm (w) x 105mm (h)
| Weight: | -
2,55kg
|
|
Reviews
There are no reviews yet.