Move freely on stage while the perfect monitor mix is delivered directly to your ears: the amazing performance and reliability of the U500® In-Ear Monitoring Systems will surpass your expectations for certain. Designed with the pro user in mind, they feature advanced technology, contemporary looks and straightforward operation.
U500® In-Ear Systems provide a selection of 96 channels and 2, 10 or 30 mW RF output power for a transmission range greater than 100 m. For quick and trouble-free setup, they allow for convenient infrared synchronisation of transmitter and receiver. U500® In-Ears sport high-contrast OLED displays and allow for individual user name assignment. In addition, you can save 10 custom presets.
To deliver pristine, precise audio U500® In-Ear Monitoring Systems include a 3-band EQ with parametric mids, a switchable limiter and a squelch circuit. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. With a signal-to-noise ratio greater than 95 dB and less than 0,3% THD, the U500® In-Ear’s noise floor is exceptionally low.
Drawing little current only, the U500® Bodypack Receiver operates up to 10 hours on two AA batteries. A volume control allows convenient in-performance monitoring level adjustment. Three selectable squelch levels ensure optimum performance at all times.
U500® In-Ear Monitoring Systems are available for operation in five frequency ranges. The 470 – 490 MHz, 514 – 542 MHz, 584 – 608 MHz and 655 – 679 MHz bands permit running up to 12 systems simultaneously. In the 823 – 832 MHz + 863 – 865 MHz range six systems can be operated at the same time providing wireless monitoring for your entire band.
Product type
In-ear Monitoring
Type
Set
Weight
0,755 kg
LDIEHP2 – LD Systems IE HP 2 Professional In-Ear Headphones
Product type
Headphones
Type
Stereo-In-Ear Headphones
Converter principle
Dynamic
Impedance
32 Ohm(s)
Frequency response
20 – 18000 Hz
Connection type
3.5 mm TRS
Cable length
1.55 m
Weight
0,022 kg
Accessories (included)
3 pairs of foam earpieces , 3 pairs of silicone earpieces , Transport case
LDU506IEMR – LD Systems U506 IEM R Receiver
Product type
In-ear Monitoring Accessories
Transmission frequency range
655 – 679 MHz
Type
Receivers
Transmission method
FM, mono/stereo
Frequency response
40 – 16000 Hz
Audio output
3.5 mm TRS
Max. audio output level
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Indicators
Multifunctional OLED-Display , RF (LED)
Operating time
< 10 hours
Antenna connector
Fixed to housing
Controls
Down , On / Off , Up , volume
Operating voltage
2 x 1.5 V AA
Width
64 mm
Features
battery status LED
Height
100 mm
Depth
24 mm
Weight
0,095 kg
Accessories (included)
2 x AA batteries , Antenna
LDU506IEMT – LD Systems U506 IEM T Transmitter
Type
Transmitters
Channels
12
Modes of operation
focus/mono/stereo
Rated HF output power
Variable (2mW, 10mW, 30mW)
Signal-to-noise ratio
93 dB
Total Harmonic Distortion (THD)
0.3 %
Dynamic range
88 dB
Inputs
2
Input connectors
Combo TRS 6.3 mm , XLR (balanced)
Input impedance (kOhms)
12 kOhm
Antenna connector
BNC
Controls
Menu selector Button , Power On/Off , volume headphones
Operating voltage
12 – 18 V DC
Width
212 mm
Height
43 mm
Depth
123 mm
Weight
0,641 kg
Accessories (included)
19″ Rack mount kit , BNC-Antenna , power adapter
Weight
3.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems U506 IEM HP In-Ear Monitoring System with Earphones 655 – 679 MHz” Cancel reply
Reliable in-ear monitoring with more than 100 m range
96 available channels
2, 10 or 30 mW ERP selectable transmission power
Convenient infrared frequency syncing
Individual user name assignment and memory for 10 custom presets
Extended frequency response
3-band EQ with parametric mids
Switchable limiter
Stereo, focus and mono modes of operation
High-contrast OLED display
Transmitter with direct monitoring headphone output
Bodypack receiver with three selectable squelch levels
10 h of bodypack receiver operation on two AA batteries
Simultaneous operation of up to 12 systems
U500® IEM transmitter compatible with U300® IEM bodypacks
Content
Move freely on stage while the perfect monitor mix is delivered directly to your ears: the amazing performance and reliability of the U500® In-Ear Monitoring Systems will surpass your expectations for certain. Designed with the pro user in mind, they feature advanced technology, contemporary looks and straightforward operation.
U500® In-Ear Systems provide a selection of 96 channels and 2, 10 or 30 mW RF output power for a transmission range greater than 100 m. For quick and trouble-free setup, they allow for convenient infrared synchronisation of transmitter and receiver. U500® In-Ears sport high-contrast OLED displays and allow for individual user name assignment. In addition, you can save 10 custom presets.
To deliver pristine, precise audio U500® In-Ear Monitoring Systems include a 3-band EQ with parametric mids, a switchable limiter and a squelch circuit. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. With a signal-to-noise ratio greater than 95 dB and less than 0,3% THD, the U500® In-Ear's noise floor is exceptionally low.
Drawing little current only, the U500® Bodypack Receiver operates up to 10 hours on two AA batteries. A volume control allows convenient in-performance monitoring level adjustment. Three selectable squelch levels ensure optimum performance at all times.
U500® In-Ear Monitoring Systems are available for operation in five frequency ranges. The 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz and 655 - 679 MHz bands permit running up to 12 systems simultaneously. In the 823 - 832 MHz + 863 - 865 MHz range six systems can be operated at the same time providing wireless monitoring for your entire band.
Product type
In-ear Monitoring
Type
Set
Weight
0,755 kg
LDIEHP2 - LD Systems IE HP 2 Professional In-Ear Headphones
Product type
Headphones
Type
Stereo-In-Ear Headphones
Converter principle
Dynamic
Impedance
32 Ohm(s)
Frequency response
20 - 18000 Hz
Connection type
3.5 mm TRS
Cable length
1.55 m
Weight
0,022 kg
Accessories (included)
3 pairs of foam earpieces , 3 pairs of silicone earpieces , Transport case
LDU506IEMR - LD Systems U506 IEM R Receiver
Product type
In-ear Monitoring Accessories
Transmission frequency range
655 - 679 MHz
Type
Receivers
Transmission method
FM, mono/stereo
Frequency response
40 - 16000 Hz
Audio output
3.5 mm TRS
Max. audio output level
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Indicators
Multifunctional OLED-Display , RF (LED)
Operating time
< 10 hours
Antenna connector
Fixed to housing
Controls
Down , On / Off , Up , volume
Operating voltage
2 x 1.5 V AA
Width
64 mm
Features
battery status LED
Height
100 mm
Depth
24 mm
Weight
0,095 kg
Accessories (included)
2 x AA batteries , Antenna
LDU506IEMT - LD Systems U506 IEM T Transmitter
Type
Transmitters
Channels
12
Modes of operation
focus/mono/stereo
Rated HF output power
Variable (2mW, 10mW, 30mW)
Signal-to-noise ratio
93 dB
Total Harmonic Distortion (THD)
0.3 %
Dynamic range
88 dB
Inputs
2
Input connectors
Combo TRS 6.3 mm , XLR (balanced)
Input impedance (kOhms)
12 kOhm
Antenna connector
BNC
Controls
Menu selector Button , Power On/Off , volume headphones
Operating voltage
12 - 18 V DC
Width
212 mm
Height
43 mm
Depth
123 mm
Weight
0,641 kg
Accessories (included)
19" Rack mount kit , BNC-Antenna , power adapter
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
The earphones have been designed for a high wearing comfort, and a multifunction display provides all the relevant system information. Operation time exceeds 12h with high quality batteries. A 19" rackmount kit and a rugged ABS plastic carrying case complete the MEI 1000 G2 package.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
Model name: LDMEI1000G2BPR
Product type: Belt pack receiver
Radio frequency range: 823 - 832 and 863 - 865 MHz
Channels: 96 (8 groups of 12 channels)
Transmission method: FM, stereo
Frequency response: 60 Hz - 16 kHz
S/N ratio: 80 dB
THD: < 1 %
Audio outputs: 3.5 mm jack
Max. audio output level: 100 mW
Controls: Up, Down, Escape, Set, Volume
Indicators: LC Display, Low Battery, Power
Power supply: 2 x 1.5 V AA
Operating time: > 13 hrs., battery-dependent
Width: 65 mm
Height: 90 mm
Depth: 24 mm
Model name: LDMEI1000G2T
Product type: Transmitter
Radio frequency range: 823 - 832 and 863 - 865 MHz
Channels: 96 (8 groups of 12 channels)
Transmission method: FM, stereo
RF output: 10 mW
Frequency response: 60 Hz - 16 kHz
S/N ratio: 85 dB
Inputs: 2
Input connections: XLR/ 6.3 mm jack (combo)
Input impedance: 14 kOhm
Antenna connector: TNC
Controls: up, down, set, power, volume headphone, input level, pad
Indicators: LC display
Power supply: 12 - 18 V DC
Width: 200 mm
Height: 44 mm
Depth: 96 mm
Accessories (included): Antenna, power supply, headphones
Reliable in-ear monitoring with more than 100 m range
96 available channels
2, 10 or 30 mW ERP selectable transmission power
Convenient infrared frequency syncing
Individual user name assignment and memory for 10 custom presets
Extended frequency response
3-band EQ with parametric mids
Switchable limiter
Stereo, focus and mono modes of operation
High-contrast OLED display
Transmitter with direct monitoring headphone output
Bodypack receiver with three selectable squelch levels
10 h of bodypack receiver operation on two AA batteries
Simultaneous operation of up to 12 systems
U500® IEM transmitter compatible with U300® IEM bodypacks
Package is not included headphones.
Move freely on stage while the perfect monitor mix is delivered directly to your ears: the amazing performance and reliability of the U500® In-Ear Monitoring Systems will surpass your expectations for certain. Designed with the pro user in mind, they feature advanced technology, contemporary looks and straightforward operation.
U500® In-Ear Systems provide a selection of 96 channels and 2, 10 or 30 mW RF output power for a transmission range greater than 100 m. For quick and trouble-free setup, they allow for convenient infrared synchronisation of transmitter and receiver. U500® In-Ears sport high-contrast OLED displays and allow for individual user name assignment. In addition, you can save 10 custom presets.
To deliver pristine, precise audio U500® In-Ear Monitoring Systems include a 3-band EQ with parametric mids, a switchable limiter and a squelch circuit. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. They offer a choice of stereo or mono operation and a direct monitoring headphone output at the transmitter. With a signal-to-noise ratio greater than 95 dB and less than 0,3% THD, the U500® In-Ear\'s noise floor is exceptionally low.
Drawing little current only, the U500® Bodypack Receiver operates up to 10 hours on two AA batteries. A volume control allows convenient in-performance monitoring level adjustment. Three selectable squelch levels ensure optimum performance at all times.
U500® In-Ear Monitoring Systems are available for operation in five frequency ranges. The 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz and 655 - 679 MHz bands permit running up to 12 systems simultaneously. In the 823 - 832 MHz + 863 - 865 MHz range six systems can be operated at the same time providing wireless monitoring for your entire band.
In-ear Monitoring
Set
584 - 608 MHz
0,755 kg
LDU505IEMT - LD Systems U505 IEM T Transmitter - 584 - 608 MHz
In-ear Monitoring Accessories
Transmitters
12
mono/stereo
FM, mono/stereo
^ , 10 mW , 30 mW
40 - 16000 Hz
93 dB
0.3 %
88 dB
BNC
2
Menu selector Button , Power On/Off , volume headphones
Combo TRS 6.3 mm , XLR (balanced)
12 kOhm
Multifunctional OLED-Display
12 - 18 V DC
212 mm
43 mm
123 mm
0,66 kg
19" Rack mount kit , BNC-Antenna , power adapter
LDU505IEMR - LD Systems U505 IEM R Receiver - 584 - 608 MHz
Receivers
3.5 mm TRS
3.5 mm TRS
16 Ohm(s)
33 mW @ 16 Ohm mW , 80 mW @ 33 Ohm mW
Fixed to housing
Down , On / Off , Up , volume
RF (LED)
2 x 1.5 V AA
64 mm
100 mm
24 mm
0,095 kg
2 x AA batteries , Antenna
battery status LED
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
The earphones have been designed for a high wearing comfort, and a multifunction display provides all the relevant system information. Operation time exceeds 12h with high quality batteries. A 19" rackmount kit and a rugged ABS plastic carrying case complete the MEI 1000 G2 package.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
Model name: LDMEI1000G2BPR
Product type: Belt pack receiver
Radio frequency range: 823 - 832 and 863 - 865 MHz
Channels: 96 (8 groups of 12 channels)
Transmission method: FM, stereo
Frequency response: 60 Hz - 16 kHz
S/N ratio: 80 dB
THD: < 1 %
Audio outputs: 3.5 mm jack
Max. audio output level: 100 mW
Controls: Up, Down, Escape, Set, Volume
Indicators: LC Display, Low Battery, Power
Power supply: 2 x 1.5 V AA
Operating time: > 13 hrs., battery-dependent
Width: 65 mm
Height: 90 mm
Depth: 24 mm
Model name: LDMEI1000G2T
Product type: Transmitter
Radio frequency range: 823 - 832 and 863 - 865 MHz
Channels: 96 (8 groups of 12 channels)
Transmission method: FM, stereo
RF output: 10 mW
Frequency response: 60 Hz - 16 kHz
S/N ratio: 85 dB
Inputs: 2
Input connections: XLR/ 6.3 mm jack (combo)
Input impedance: 14 kOhm
Antenna connector: TNC
Controls: up, down, set, power, volume headphone, input level, pad
Indicators: LC display
Power supply: 12 - 18 V DC
Width: 200 mm
Height: 44 mm
Depth: 96 mm
Accessories (included): Antenna, power supply, headphones
The SR 400 diversity receiver is your best choice for cost-efficient, high-performance multichannel systems. Up to 12 channels* can be used simultaneously within the same subband and even large systems will work smoothly in environments hostile to RF transmission.
Being compatible with professional WMS 4000 antenna splitters, power supplies, and high quality antennas, the WMS 400 enables you to set up highly complex wireless systems. In Auto Setup mode, the receiver will scan the available bands, find an interference-free channel, and transmit the related frequency data to the assigned transmitter via infrared. This technique significantly reduces the time it takes to set up a multichannel system. A Rehearsal function identifying dead spots, a programmable display clearly indicating all important system parameters, twocolor display backlighting warning the user of critical conditions from a distance, and a transmitter battery status display on the receiver enhance reliability and add to ease of use.
Features:
* Integrated frequency scanner with frequency management database * Up to 12 channels can be used simultaneously in each subband * Infrared data transmission link * Rehearsal function for finding dead spots * Programmable warning functions using two-color display backlighting
Specifications:
* Carrier frequency range: 650 to 680, 680 to 710, 720 to 750, 760 to 790, 790 to 820, 835 to 862 MHz * Modulation: FM * Audio bandwidth: 35 to 20,000 Hz * THD:
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual [7,82 MB]
Reviews
There are no reviews yet.