| Content | CM6E is a dual cone built-in 6.5” 100 volt loudspeaker suitable for almost any installation. This budget-friendly loudspeaker will deliver a loud and clear sound reproduction. The CM6E has several power tappings (6 – 3 – 1.5 watts) and is the ideal speaker for the distribution of microphone calls and background music.
The housing is made of high quality ABS. The grille is made of steel and the loudspeaker has a 6.5” paper dual cone woofer. The loudspeaker is easy to install, due to its simple, quick mounting system with 3 screws. |
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | n/a | | Rated Input | 6W (high impedance) | | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16) | | Continuous program | 18W (8), 12W(16) | | Impedance | (100V Line) 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W) | | Impedance | (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W),10kΩ (0.5W), 20kΩ (0.25W) | | Impedance | (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W),10kΩ (0.06W), 20kΩ (0.03W) | | Low (Adjustable) | 16Ω, 8Ω | | Sound Pressure Level | 89dB (1W, 1m) | | Frequency Response | 80 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: Balanced dome- type | | Speaker Component | Low frequency: 12cm cone-type | | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | | Finish Enclosure | n/a | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | Artificial fiber, black | | Dimensions | ø230 x 154 (D)mm | | Weight | 1.5kg (including panel) | | Accessories Panel | 1 | | Ceiling reinforcement ring | n/a | | Safety wire | n/a | | Paper pattern | 1 | | Option Anchor hanging bracket | n/a | | Back can | HY- BC1 | | Tile bar bridge | n/a | | Trim ring | n/a |
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
|
Features:
- Consistent 90° broadband pattern control.
- Components:
300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
25 mm (1 exit) compression driver. - Extraordinary clarity for speech and vocals with extended frequency response for music.
- 250 Watt power handling with high sensitivity provides high SPL capability.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- Clean, contemporary grille and optional backbox available.
| System: Frequency Range (-10 dB): 34 Hz – 18 kHz Frequency Response (±3 dB): 47 Hz – 16 kHz Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz) Directivity Factor (Q): 8.7 (1k - 16kHz) Directivity Index (DI): 9.4 dB (1k - 16kHz) Long-Term System 250 W (1000 W peak), 2 hrs Power Rating, IEC: 150 W (600 W peak), 100 hrs Sensitivity (2.83V@ 1m):
94 dB measured half-space
99 dB computed for competitive comparison Maximum SPL: 118 dB cont ave (124 dB peak) Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance (321C): 8 ohms Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W Transducers: Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil. High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil. Physical: Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) 321C:
1) + in
2) + loop out
3) – loop out
4) – in Tap Connection (321CT): 321CT:
A) Common
B) 7.5W@70V, 15W@100V
C) 15W@70V, 30W@100V
D) 30W@70V, 60W@100V
E) 60W@70V, n/c@100V Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
UL Listed per UL1876 Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox. Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws. Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners. Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT. Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs) Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs) Included Accessories: Ported baffl e pre-attached, transformer on 321CT. Optional Accessories:
MTC-300SG12 Grille, square contoured, white.
MTC-300BB12 Backbox, 80 liters (3 cubic feet)
MTC-300T150 Transformer, 150 W for use with 321C. |
|
JBL CONTROL CONTRACTOR 40 SERIES C40CS/T-PL Direct Radiating In-Ceiling Subwoofer
The Control 40CS/T is a direct radiating, high impact, 8" subwoofer with a built-in passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact. The system can also be used via an active crossover design with the rest of the Control Contractor in-ceiling line for superior bass response and can be operated off a 70V / 100V distributed line or in direct mode.
Features:
Extended Bass Response with Maximum Impact
Passive Crossover Network for Easy to Install Subwoofer-Satellite Systems
Switchable 70V/100V or Low-Z
Elegant design fits any décor
Specifications:
Component: 8" long-throw woofer
Frequency Range: 30 Hz - 280 Hz
Power Capacity: 200W program, 100W pink noise
Sensitivity: 95 dB (near corner), 89 dB (center of ceiling), 1W, 1m
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Satellite Outputs: Connectors for 2 or 4 Control 42C satellite speakers
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 13.6" x 13.6“
|
The JBL Control 24CT MicroPlus is a compact in-ceiling speaker, providing full, high quality sound for background music and music-plus-paging systems. Low distortion, a smooth, natural frequency response, and a 25W transformer make the Control 24CT MicroPlus ideal for medium volume business music. Low frequency output can be augmented with the addition of one of the Control Contractor subwoofer models.
NB.: Priced each (per speaker) and sold in pairs only.
- Type:Ceiling
- Power Rating:25W
- Frequency Response:80 Hz - 25 kHz
- 100 Volt Line:Yes
- Colour:White
Frequency Range (-10dB)1: 85 Hz - 25 kHz
Power Capacity - Program2: 30 W
Pink2: 15 W
Nomical Dispersion: 150º conical
Nominal Sensitivity 1 W, 1m: 86 dB
Nominal Impedance: 8 ohms (24C Micro)
Transformer Taps - 100V: 8,4,2,1 W (24CT Micro)
25,12 W (24 CT MicroPlus)
70.7 V: 8,4,2,1,.5 W (24CT Micro)
25,12,6 W (24CT MicroPlus)
Components - Low Frequency: 4 1⁄2 in (115 mm)
High Frequency: 1⁄2 in (12 mm)
Enclosure: Formed steel backcan
Dimensions: 106 x 195 mm
4.2 x 7.7 in
Net Weight: 2.5 kg (5.5 lb) |
Reviews
There are no reviews yet.