| Content |
Features
New (Extended Resolution) long-throw faders for maximum control
and resolution, with integrated protective dust cover
New Sweepable High Pass filter 20-200Hz
Ultra low noise and accurate 'Constant Q' circuitry
Balanced Inputs and Outputs on XLR and Jack connectors
Switchable 6dB or 15dB cut and boost
Audio Ground lift switch on rear
Intuitive controls
User friendly layout
...and most of all, flawless performance in any audio environment
Sometimes a 10 band Graphic Equalizer isn't enough, but a 30 band EQ is overkill.
Well, for times like these, we've designed the ARX EQ215. It's a dual channel 15
band Graphic Equalizer built to the same exacting standards as our EQ260, but
designed especially for applications where the program material is predominantly
pre-recorded and pre-processed.
Typical applications are, for example, in DJ systems, Karaoke bars, home theatre,
project and budget studio control rooms, and home stereo systems
Delivering flawless professional performance, it takes up minimal rack space being
neatly housed in a compact 2 RU all steel chassis.
Quality you can feel as well as hear
On the EQ215 's front panel, each channel has 15 of our new Extended Resolution long
throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination
of high fader resolution and maximum cut and boost. A protective dust cover is also fitted
to each fader.
As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate
circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass
switch which removes the EQ215 completely from the signal path.
Accurate Constant Q Circuitry
Internally, the EQ215 features innovative Constant Q circuitry.
What makes this so good? Well, it means that the graphical representation of the sliders
on the front panel more accurately reflects the changes you are making to the sound, as
compared to the very rough approximation you get with many traditional graphic EQ designs.
In other words, 'what you see is what you get.'
Combine this with the EQ215 's ultra low noise circuitry, and you have an equalizer that is
unsurpassed for total accuracy.Additionally, at the 0dB slider position each filter is, in effect,
removed from the circuit to further enhance the EQ215 's low noise figures.
Balanced Inputs and Outputs
On the rear panel, each channel of the EQ215 has true differential Balanced Inputs and Servo
Balanced Outputs, with both XLR as well as convenient TRS balanced jack connectors.
There is also an audio ground lift switch to isolate the audio ground from the chassis ground.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via
a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch.
When you need superlative, uncompromising audio quality but can't justify the use of a dual 30
band EQ such as the EQ260, we belive the EQ215 is the only graphic equalizer to choose.
With its compact High Density design, clean good looks and precision electronics, the ARX EQ215
will truly enhance any pro audio application.
You'll never compromise on Quality when you choose ARX
T E C H N I C A L || S P E C I F I C A T I O N S
Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms
Input Headroom + 23 dB
CMRR >55 dB, 20 Hz to 20 KHz
Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
Output Level (Max) + 23 dB
Frequency Response 10Hz to 20KHz ±0.25dB
Signal to Noise ratio -93 dB Unweighted, -98 dB 'A' weighted
Distortion .0035% THD, 0dB, @1KHz
Dynamic Range 116 dB
High Pass Filter Sweepable 20-200Hz
Power Requirements 100/120 V AC, 220/240 V AC, 18VA
Weight 8lbs/3.75Kg
Dimensions19“W x 3½“H x 8“D, 482 x 89 x 205 mm (2 RU)
Input Connector type XLR, Balanced Jack
Output Connector type XLR, Balanced Jack
Front Panel Controls
Each channel has:
15 x 60mm Extended Resolution long throw, centre grounding faders
on ISO standard frequencies, 25 Hz to 20 KHz
Infinity through to +10dB Gain control
LED clipping indicator
Sweepable High Pass filter 20-200Hz
15 or 6 dB EQ Cut/Boost range switch
Hardwire bypass EQ IN/OUT switch
Rear Panel
Balanced Inputs and Outputs, on both XLR and TRS jack connectors.
Audio Ground Lift switch
AC input connector, with voltage switch and fuse. |
The class-A circuit used in the EQ-73 is similar to the eq section in the classical 1073 module, without the high pass filter. Additional frequencies have been added and the mid frequency band uses two inductors, the higher value of the second one is used for the two lowest frequencies, 160 Hz and 240 Hz, to achieve a suitable response.
The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone.
The EQ-73 has stepped frequency controls that offers a wide selection of frequencies from 20 Hz to 24 kHz.
The Low and High frequency bands are shelving and the mid frequency band is of the bell type.
The control range is +/-15 dB for the two lower bands and +/- 18dB for the high frequency band.
There are separate bypass switches for all three bands.
The EQ-73 is made to be used together with one of our PRE-73 models that has an Insert jack. It can also be used with many other units that has a low level insert jack.
Combining a PRE-73 and an EQ-73, and using a UNITE rack kit to mount them together, one will get a 19-inch 1073-style unit at a low cost and with a great sound!
FEATURES
- Vintage Style electronics. No intergrated circuits in the signal path
- 3-band with a dual inductor based mid frequency band
- Stepped frequency selection
- A wide selection of frequencies from 20 Hz to 24 kHz
- Control range up to +/- 18 dB
- Separate Bypass switches for each band
- Tantalum capacitors in the signal path
- Made to be used together with one of our PRE-73 models with an Insert jack or any other unit with a low level Insert jack
- TRS jack for in-and output connection, the nominal working level is around 18 dBu
- Selectable ground lift switch
- External power supply to avoid interaction with the audio circuits
- Great sound that suits most sound sources and genres
- A solid build quality that will last many years of normal use
|
INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typically >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: |
* 2 channel 15 2/3 octave band graphic equalizer
* 25Hz - 16kHz frequency control * Constant Q circuitry
(3% frequency accuracy) * Selectable 6dB or 12dB control
* Variable level control * By-pass switch * Overload threshold LED (5dB below clipping) * Ground lift switch * XLR & 1/4" TRS balanced Inputs/Outputs * Power: Selectable 120V/220V voltage
* Dimensions: 1.75" H x 19" W x x 8.5" D / 44.5mm x 483mm x 216mm - 1 space r.m. * Weight: 4.5 lbs. / 2.5kg
XEQ-152 Specifactions:
* Input type: Active balanced / Unbalanced * Output Impedance: |
- Professional 15-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated mono subwoofer output with adjustable crossover frequency
- Additional low-cut filter removes unwanted frequencies, e.g. floor rumble
- Highly accurate 4-segment LED output metering and input gain controls for easy level setting
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- 3-Year Warranty Program*
- Designed and engineered in Germany
|
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
|
Reviews
There are no reviews yet.