BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL

43.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Acoustic Amp Modeler/Direct Recording Preamp/DI Box Analog modeling acoustic guitar preamp/stompbox with DI recording output This BEHRINGER product has been designed to compete head to head with leading products on the market Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp Ultra-musical 3-band […]

 

Read more

Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼” TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.

 
  User’s Manual

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL”

Your email address will not be published. Required fields are marked *

Quick Comparison

BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL removeVOX V845 WAH WAH PEDAL removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBOSS TR-2 Tremolo Pedal removeBEHRINGER BEQ700 BASS GRAPHIC EQUALIZER Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal remove
NameBEHRINGER ADI21 ACOUSTIC DRIVER PEDAL removeVOX V845 WAH WAH PEDAL removeVOX SNAKE CHARMER COMPRESSOR PEDAL removeBOSS TR-2 Tremolo Pedal removeBEHRINGER BEQ700 BASS GRAPHIC EQUALIZER Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal remove
Image
SKUE005219V845 WAH WAHVOX SNAKE CHARMER690.ROL.105E005247E007855
Rating
Price 43.00 incl. GR VAT 69.90 incl. GR VAT 87.01 incl. GR VAT 102.00 incl. GR VAT 35.00 incl. GR VAT42.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼'' TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.

 
  User's Manual

The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board. About the VOX Wah-Wah VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today. VOX V845 Wah-Wah Specifications
  • Input/Output jacks: INST jack, AMP jack, DC i/p jack.
  • Power supply: One 9V DC battery 6F22(S-006P)
  • Power consumption: 540uA @ 9VDC
  • Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
  • Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
  • Weight: 942g (including battery)

Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.

Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.

  • Snake Charmer Compressor CT05
    • Connection: Input: x1 (guitar input), Output: x1 (line output)
    • Input / Output Impedance: 830 k-ohm / 4 k-ohm
    • Tube: 12AU7 (ECC82)
    • Power Supply: Four AA alkaline batteries or DC9V AC adapter
    • Battery Life: Approx. 18 hours
    • Current Consumption: 95 mA
    • Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
    • Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
    • Included Items: Four AA alkaline batteries

 

The BOSS TR-2 Tremolo is designed to provide guitarists with classic tremolo effects in an easy-to-use compact pedal. Dedicated "Wave," "Rate," and "Depth" knobs provide a multitude of effect possibilities.
  • Provides guitarists with high-quality vintage tremolo effects in an easy-to-use compact pedal
  • Dedicated "Wave," "Rate" and "Depth" knobs allow for precise effect tailoring
  • “Rate" control allows for higher speed adjustment than classic PN-2
  • “Wave" control alters LFO waveform from triangle to square
  • “Depth" control determines the strength of the effect
  • BOSS 5-year warranty
Product Features: Shape your sound and eliminate feedback with 7 bands of equalization This BEHRINGER product has been designed to compete head to head with leading products on the market Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band Status LED for effect on/off and battery check Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included) First-class electronic On/Off switch for noise-free operation High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany How the specific frequency bands of the BEQ700 can shape your sound 50 Hz (sub-bass) Boost: To thicken up sub-bass content, which is mostly felt rather than heard Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power 120 Hz (soft bass) Boost: To enhance the lower end of the bass spectrum Cut: To reduce the tendency of low frequency content to overwhelm a small room 400 Hz (hard bass) Boost: To enhance the "hard” bass punch of fundamental tones Cut: To reduce punch for better linkage with the kick drum 500 Hz Boost: or Cut: To control bass clarity and warmth 800 Hz Boost: To add an aggressive edge to the overall bass sound Cut: For reducing somewhat nasal or horn-like content 4.5 kHz Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone Cut: To eliminate harshness 10 kHz Boost: To bring out the upper harmonics and add edge to the overall bass tonality Cut: Apply a cut to reduce harsh high-frequency content or hiss acrobat_reader_logo. User's Manual 

VINTAGE TUBE OVERDRIVE TO800

What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain

Vintage Tube-Like Tone

In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Ease of Use

Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Perfect for guitar; great for bass and keyboards, too
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • Rugged electronic On/Off switch for noise-free operation
Weight0.50 kg0.94 kg1.00 kg1.20 kg0.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.94 kg
Weight 1.00 kg
Weight 1.20 kg
Weight 0.50 kg
Weight 0.50 kg