Content |
Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼'' TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.
User's Manual
|
The OS-2 gives players a choice of overdrive or distortion or lets them combine both--all in a single compact pedal. Its distortion maintains the subtle nuances of single-coil guitar pickups.
- Flexible distortion pedal capable of producing blended overdrive/distortion sounds
- Provides both "over-the-top" distortion sounds and less extreme overdrive tones for rhythm playing
- Includes Level, Tone, Drive and Color controls for precise tonal shaping
- BOSS 5-year warranty
|
The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.
- Compact chorus pedal especially designed for bass guitar
- Applies chorus sound to the high frequencies without altering low frequencies
- Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
- BOSS 5-year warranty
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
Nominal Input Level |
-20 dBu |
Input Impedance |
1 M ohm |
Nominal Output Level |
-20 dBu |
Output Impedance |
1 k ohm |
Recommended Load Impedance |
10 k ohms or greater |
Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
Indicator |
CHECK indicator (Serves also as battery check indicator) |
Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
Current Draw |
36 mA (DC 9 V) |
Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
Options |
AC Adaptor (PSA series) |
Size and Weight |
Width |
|
Depth |
|
Height |
|
Weight |
|
| The BOSS AW-3 Dynamic Wah pedal gives guitarists a wide range of classic auto-wah and dynamic wah effects, plus a new "Humanizer" effect which can simulate human vowel sounds. A Bass input provides a variety of funky wah sounds for bass guitar.
- Compact pedal creates a variety of classic "wah" effects
- Dynamic wah sounds provide variable effect based on picking strength
- “Humanizer" effect creates human voice-type vowel sounds
- Dedicated Bass input for processing bass guitar
- EXP Pedal mode allows wah control via optional expression pedal
- Tempo can be set for pedal control or at fixed rate via Manual mode
- BOSS 5-year warranty
| Studio Quality Effects at Your Feet
Premier recording studios worldwide use Eventide on hit after hit. ModFactor features Eventide's 27 best modulation effects without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 27 of Eventideʼs signature stereo or mono effects:
- Liquid Chorus
- Shimmer Chorus
- Organic Chorus
- Negative Phaser
- Postive Phaser
- BiPhase Phaser
- Feedback Phaser
- WahWah Q-Wah
- Voc-Wah Q-Wah
- Positive Flanger
- Negative Flanger
- Jet Flanger
- Thru-o Flanger
- Lowpass ModFilter
- HiPass ModFilter
- BandPass ModFilter
- Standard Rotary
- Giant Rotary
- Bias Tremolo
- Opto Tremolo
- Modern Vibrato
- Vintage Vibrato
- Retro Vibrato
- Pitch Undulator
- Feedback Undulator
- Ring (DC) Ringmod
- String (AC) Ringmod
- Studio quality sound
- Software upgradeable via USB 2.0
- MIDI control via USB or MIDI in, out/thru
- Instant program change
- Real-time control with 10 knobs, MIDI, or expression pedal
- Tap tempo and MIDI clock sync
- 40 factory presets, unlimited through MIDI
- True analog bypass
- Rugged cast metal construction
- Reliable metal footswitches for instant preset access
- Mono or stereo operation
- Guitar or line level inputs and outputs
SPECIFICATIONS:
Analog Input/Output |
Input impedance |
500K ohms |
Output Impedance |
470 ohms |
Recommended Load Impedance |
10K ohms or greater |
Connectors |
Input 1 (mono) |
¼ inch mono phone jack |
Input 2 |
¼ inch mono phone jack |
Output 1 (mono) |
¼ inch mono phone jack |
Output 2 |
¼ inch mono phone jack |
Expression Pedal |
¼ inch mono phone jack |
Aux Switch |
¼ inch stereo phone jack |
USB |
Type B Socket. Use 2.0 cables only. |
MIDI In |
Five pin DIN (Female) |
MIDI Out/Thru |
Five pin DIN (Female) |
AC Adapter Jack |
Power Supply included (see below) |
Physical |
Power |
9 VDC, 1200 mA, Tip hot (+) |
Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
Weight |
2.15 lbs, 1kG |
|
Reviews
There are no reviews yet.