Content |
Beyerdynamic Headphones DT 100
The DT 100 headphone is widely used in audio recording and monitoring applications in studios worldwide.
It is also intended for use in ENG/EFP field work, on-air commentary and in any other situation which needs to address the challenges of today's digital and technological advances. The DT 100 offers a high degree of comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively seal out ambient noise yet apply minimal pressure against the ear.
Specifications:-
* Transducer type Dynamic
* Operating principle Closed
* Frequency response 30 - 20,000 Hz
* Nominal impedance acc. to IEC 60268-7 16 ? ± 10% per cartridge
* Nominal SPL acc. to IEC 60268-7 94 dB
* Nominal THD acc. to IEC 60268-7
* Power handling capacity acc. to IEC 60268-7 1000 mW
* Sound coupling to the ear Circumaural
* Ambient noise isolation 20 dB (A)
* Average pressure on ear acc. to IEC 60268-7 4.5 N
* Weight without cable 350 g
| 80 Ohm specs
- Type Over-ear (Closed)
- Channels Stereo
- Noise isolation 18 dB reduction
- Connections 3.5mm stereo, 6.25mm stereo
- Weight 9.52 oz
General
- Type Over-ear (Closed)
- Cable type Y-cable
- Channels Stereo
Other features
- Plug type Straight
- Gold-plated connector Yes
Audio quality
Noise reduction
- Noise isolation 18 dB reduction
Connections
- Connections 3.5mm stereo, 6.25mm stereo
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
Driver Size |
1.6" / 40 mm |
Driver Type |
Dynamic |
Magnet Type |
Cobalt |
Design |
Over-Ear (Circumaural) |
Earcup Style |
Closed-Back |
General
Frequency Response |
20 Hz to 20 kHz |
Sensitivity |
113.5 dB at 1 kHz |
Impedance |
32 Ohms |
Maximum Power Handling |
100 mW |
Connectivity
Audio Connector to Source |
1/8" / 3.5 mm |
Adapter (Included) |
1/4“ |
Cable
Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
| DT 990 PRO
Professional headphone for studio applications, open
Features
Open, diffuse-field systems
Professional version of the oftentimes awarded DT 990
Excellent sound reproduction
Robust spring steel headband
Single-sided cable
Soft replaceable ear cushions
Gold plated stereo mini jack and 1/4" adapter
Technical Specifications
Transducer type Dynamic
Operating principle Open
Weight without cable 250 g
Frequency response 5 - 35,000 Hz.
Nominal impedance acc. to IEC 60268-7 250 Ω /System
Nominal SPL acc. to IEC 60268-7 > 96 dB
Nominal THD acc. to IEC 60268-7
Power handling capacity acc. to IEC 60268-7 100 mW
Sound coupling to the ear Circumaural
Average pressure on ear acc. to IEC 60268-7 3.5 N |
Transmission Type: Wired
Headphone frequency response: 10 - 30.000 Hz
Nominal sound pressure level: 100 dB SPL
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: Detachable cable – various connectors available
Polar Pattern For Microphone: Hypercardioid
Transducer type for microphone: Dynamic - Hypercardioid
| With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 22,000 Hz
- Max Input Power: 1,300 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 7.8 oz (220 g)
- Cable - Detachable: No
- Cable: 3 m (9.84') Straight cable, left-side exit
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
|
Reviews
There are no reviews yet.