| Content |
Beyerdynamic Headphones DT 100
The DT 100 headphone is widely used in audio recording and monitoring applications in studios worldwide.
It is also intended for use in ENG/EFP field work, on-air commentary and in any other situation which needs to address the challenges of today's digital and technological advances. The DT 100 offers a high degree of comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively seal out ambient noise yet apply minimal pressure against the ear.
Specifications:-
* Transducer type Dynamic
* Operating principle Closed
* Frequency response 30 - 20,000 Hz
* Nominal impedance acc. to IEC 60268-7 16 ? ± 10% per cartridge
* Nominal SPL acc. to IEC 60268-7 94 dB
* Nominal THD acc. to IEC 60268-7
* Power handling capacity acc. to IEC 60268-7 1000 mW
* Sound coupling to the ear Circumaural
* Ambient noise isolation 20 dB (A)
* Average pressure on ear acc. to IEC 60268-7 4.5 N
* Weight without cable 350 g
| Specs:
- Semi - Open
- Innovative bass refelx system
- Rugged headband cosntruction
- Single-sided coiled cable
- Soft headband pad
- Gold plated stereo mini jack (3.5mm) and 1/4" adapter
- Transducer type: Dynamic
- Frequency response: 5 - 35,000 Hz
- Nominal impedance: 250 ohm
- Nominal SPL : 96 dB
- T.H.D: < 0.2%
- Power handling capacity: 100 mW
- Sound coupling to ear: Circumaural
- Weight (without cable) 295 g
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
| Driver Size |
1.6" / 40 mm |
| Driver Type |
Dynamic |
| Magnet Type |
Cobalt |
| Design |
Over-Ear (Circumaural) |
| Earcup Style |
Closed-Back |
General
| Frequency Response |
20 Hz to 20 kHz |
| Sensitivity |
113.5 dB at 1 kHz |
| Impedance |
32 Ohms |
| Maximum Power Handling |
100 mW |
Connectivity
| Audio Connector to Source |
1/8" / 3.5 mm |
| Adapter (Included) |
1/4“ |
Cable
| Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
| With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 22,000 Hz
- Max Input Power: 1,300 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 7.8 oz (220 g)
- Cable - Detachable: No
- Cable: 3 m (9.84') Straight cable, left-side exit
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
| K 701
* Revolutionary flat-wire voice coil technology
* Patented AKG Varimotion ultra-precision two-layer diaphragm
* Self-adjusting cushioned genuine-leather headband
* Bi-wiring, high-performance cable with 1/4" jack plug
* Comfortable, specially shaped "3D-Form" ear pads
* Complete with stylish storage cradle
* Individually tested and numbered
Whether you prefer the holistic approach or like to listen analytically, the K 701
will turn perception into pure enjoyment.
AKG is the first manufacturer in the world to use revolutionary flat-wire technology
in headphones, namely, the K 701. The result is a truly dramatic sound that places
every musician at their correct location with pinpoint accuracy. This kind of agility,
spaciousness, brilliant highs, and velvety, punchy bass is simply miraculous.These
superlative open-back dynamic headphones provide an outstandingly accurate sound
and excellent imaging. Try the K 701 and find out what ingenious headphone engineering
can do for you.
SPECIFICATIONS:
Type Open-back, dynamic headphones
Efficiency 105 dB/V
Frequency range 10 Hz to 39.8 kHz
Rated impedance 62 ohms
Max. input power 200 mW
Cable bi-wiring, single-sided, 99.99% oxygen-free cable, 3 m (10 ft.)
Connector 1/4" hard gold plated | DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
|
Reviews
There are no reviews yet.