| Content |
Beyerdynamic Headphones DT 100
The DT 100 headphone is widely used in audio recording and monitoring applications in studios worldwide.
It is also intended for use in ENG/EFP field work, on-air commentary and in any other situation which needs to address the challenges of today's digital and technological advances. The DT 100 offers a high degree of comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively seal out ambient noise yet apply minimal pressure against the ear.
Specifications:-
* Transducer type Dynamic
* Operating principle Closed
* Frequency response 30 - 20,000 Hz
* Nominal impedance acc. to IEC 60268-7 16 ? ± 10% per cartridge
* Nominal SPL acc. to IEC 60268-7 94 dB
* Nominal THD acc. to IEC 60268-7
* Power handling capacity acc. to IEC 60268-7 1000 mW
* Sound coupling to the ear Circumaural
* Ambient noise isolation 20 dB (A)
* Average pressure on ear acc. to IEC 60268-7 4.5 N
* Weight without cable 350 g
| 80 Ohm specs
- Type Over-ear (Closed)
- Channels Stereo
- Noise isolation 18 dB reduction
- Connections 3.5mm stereo, 6.25mm stereo
- Weight 9.52 oz
General
- Type Over-ear (Closed)
- Cable type Y-cable
- Channels Stereo
Other features
- Plug type Straight
- Gold-plated connector Yes
Audio quality
Noise reduction
- Noise isolation 18 dB reduction
Connections
- Connections 3.5mm stereo, 6.25mm stereo
| DT770 Closed reference headphone for control and monitoring applications (optionally with limiter).
The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time.
▲ Closed, diffuse-field studio headphone
▲ "Bass reflex" technology for improved bass response
▲ Comfortable fit due to rugged, adjustable, soft padded headband construction
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Single-sided cable
▲ NEW - Limiter (Optional)
▲ Velour, circumaural ear pads
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
250 ohms |
| Headphone frequency response |
|
5 - 35.000 Hz |
| Nominal sound pressure level |
|
96 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
270 g |
| K 701
* Revolutionary flat-wire voice coil technology
* Patented AKG Varimotion ultra-precision two-layer diaphragm
* Self-adjusting cushioned genuine-leather headband
* Bi-wiring, high-performance cable with 1/4" jack plug
* Comfortable, specially shaped "3D-Form" ear pads
* Complete with stylish storage cradle
* Individually tested and numbered
Whether you prefer the holistic approach or like to listen analytically, the K 701
will turn perception into pure enjoyment.
AKG is the first manufacturer in the world to use revolutionary flat-wire technology
in headphones, namely, the K 701. The result is a truly dramatic sound that places
every musician at their correct location with pinpoint accuracy. This kind of agility,
spaciousness, brilliant highs, and velvety, punchy bass is simply miraculous.These
superlative open-back dynamic headphones provide an outstandingly accurate sound
and excellent imaging. Try the K 701 and find out what ingenious headphone engineering
can do for you.
SPECIFICATIONS:
Type Open-back, dynamic headphones
Efficiency 105 dB/V
Frequency range 10 Hz to 39.8 kHz
Rated impedance 62 ohms
Max. input power 200 mW
Cable bi-wiring, single-sided, 99.99% oxygen-free cable, 3 m (10 ft.)
Connector 1/4" hard gold plated |
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
| Driver Size |
1.6" / 40 mm |
| Driver Type |
Dynamic |
| Magnet Type |
Cobalt |
| Design |
Over-Ear (Circumaural) |
| Earcup Style |
Closed-Back |
General
| Frequency Response |
20 Hz to 20 kHz |
| Sensitivity |
113.5 dB at 1 kHz |
| Impedance |
32 Ohms |
| Maximum Power Handling |
100 mW |
Connectivity
| Audio Connector to Source |
1/8" / 3.5 mm |
| Adapter (Included) |
1/4“ |
Cable
| Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
|
Reviews
There are no reviews yet.