| Content |
Need big sound, slamming bass and audiophile extension, but donʼt want to see where it comes from? The ISW-4 in-wall subwoofer is for you. Two long-throw 200mm (8in) drivers allow it to move the large volumes of air needed for high-quality low-frequency output. The speaker is housed in its own sturdy back box for rock-solid stability and minimum sound bleed, and is powered by the SA250, a separate audiophile-standard 250W Class D amplifier. |
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil
External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors2]( "colors2")
|
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
| Description | Active closed-box subwoofer system |
|---|
| Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | | Amplifier |
| | Power output: | 200W | | Rated power consumption: | 40W / 0.5W standby | | Input impedance: | 33kΩ | | Signal / noise: | >90dB | | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | | Net weight | 12.5kg (27.6 lb) | | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | |
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Description Active closed-box subwoofer system
Drive unit 2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power consumption: 110W (105W - 100V version)
Input impedance: 100kΩ
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
| For big sound in smaller spaces, you canʼt beat the ASW608, the most compact of the 600 Series subwoofers.
Its long-throw 200mm driver allows the ASW608 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamm
| Description |
Active closed-box subwoofer system |
| Drive unit |
ø200mm (8 in) paper/Kevlar® cone long-throw |
| Frequency range |
-6dB at 23Hz and 25/140Hz adjustable (EQ at A) |
| Frequency response |
±3dB 32Hz – 40/140Hz adjustable (EQ at A) |
| Bass Extension |
-6dB at 23Hz (position A) |
|
-6dB at 28Hz (position B) |
|
-6dB at 36Hz (position C) |
| Amplifier |
Power output: 200W |
| Rated power consumption: |
40W/ 0.5W standby |
| Input impedance: |
33kW |
| Signal / noise: |
>90dB |
| Functions: |
Volume level – line in |
|
Volume level – speaker in |
|
Low-pass filter frequency – line in only |
|
Low-pass filter bypass |
|
Bass extension |
|
Bass roll-off alignment |
|
Auto sense on/standby |
|
Phase switch |
| Inputs: |
Line In (RCA Phono) |
|
Speaker in (Binding post) |
|
12v trigger (3.5mm jack) |
|
Low-pass filter |
|
Active 4th-order, variable cut-off frequency |
| Dimensions |
Height: 260mm (10.2 in) not including feet |
|
Width: 260mm (10.2 in) |
|
Depth: 330mm (13 in) including grille and controls |
| Net weight |
8.85kg (19.5 lb) |
| Finishes |
Black Ash Vinyl |
|
Red Cherry Vinyl |
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
|
Reviews
There are no reviews yet.