DIEN BT-621 6″ CEILING LOUDSPEAKER 6W 100V

• 91dB
• 8Ω
• Φ198 * 55mm
• Φ158mm

ΑΒS Plastic. White
Mettalic Grid, White.
8” Dual Cone
Max Power: 20W

JBL CONTROL CONTRACTOR 40 SERIES C40CS/T-PL Direct Radiating In-Ceiling Subwoofer
The Control 40CS/T is a direct radiating, high impact, 8" subwoofer with a built-in passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact. The system can also be used via an active crossover design with the rest of the Control Contractor in-ceiling line for superior bass response and can be operated off a 70V / 100V distributed line or in direct mode.

Features:
Extended Bass Response with Maximum Impact
Passive Crossover Network for Easy to Install Subwoofer-Satellite Systems
Switchable 70V/100V or Low-Z
Elegant design fits any décor

Specifications:
Component: 8" long-throw woofer
Frequency Range: 30 Hz - 280 Hz
Power Capacity: 200W program, 100W pink noise
Sensitivity: 95 dB (near corner), 89 dB (center of ceiling), 1W, 1m
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Satellite Outputs: Connectors for 2 or 4 Control 42C satellite speakers
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 13.6" x 13.6“

The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.

Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.

A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.

The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

Features

• Consistent 120° broadband pattern control forexceptional coverage
• Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
• Extraordinary clarity for speech and vocals withextended frequency response for music
• 150 Watts Power Handling
• Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
• Integrated back can with clean, contemporary grille

Specifications

• Frequency Response (-10dB): 47Hz to 19kHz
• Sensitivity: 90 dB; 95 dB computed for competitivecomparison
• Coverage Angle: 120 degrees conical, broadband
• Impedance: 8 ohms (in bypass model)
• Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
• Low Frequency: 6.5" woofer Kevlar reinforced cone
• High Frequency: 1" exit compression driver
• Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems. The Control 24CT Micro includes a multitap transformer for 70V or 100V systems.

Specifications:

• 85 Hz to 20 kHz frequency range
• 30 watts continuous program power (15W pink noise) capacity
• 86 dB sensitivity (1W/1m)
• Shallow steel back-can (only 4 in deep)
• 70V/100V Taps: 8W, 4W, 2W, 1W (and 0.5W for 70V only)

-42 Hz to 200 Hz frequency range (-10 dB)

-140 watts continuous program power capacity

-95 dB sensitivity (1W/1m)

-8 ohms nominal impedance

-Steel back-can with removable locking connector

-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W

-Control 19CST 100V taps: 75W, 30W, 15W.

-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)

-Net Weights: Control 19CS = 5.5 kg (12 lb),

-Control 19CST = 6.4 kg (14 lb)