The P 64 is a modular, networkcompatible audio matrix including signal processing, system monitoring and remote operability.
4 Audio slots can be equipped with 8 channel audio-inpout or output-cards to meet customized requirements. The P64 includes integrated selfmonitoring and supports spare/redundancy concepts in security-relevant systems. Complete recall of stored parameters and confiurations is possible.
300 MIPS computing power – Expandable to 1900 MIPS
Ethernet Interface – Configuration and control via TCP/IP
CAN interface – Communication with up to 100 external devices (e.g. Dynacord PowerH and/or DSA ampifieres)
RS-232 interface – Connection of media controls and building control systems
CobraNet interface – optianal redundant network module
<br>
Cooling Left-to-right, 3-stage fan<br>
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing<br>
Digital Inputs Modular<br>
Digital Outputs Modular<br>
FIR-Drive Yes<br>
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control) 3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact)3 Reference Outputs (+5 V / +10 V/ GND)<br>
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS), DSP-2 Extension Module (3 dual core processors-1200 MIPS total) , 1 DSP per Audio Module (100 MHz, 100 MIPS) 1500 MIPS total without I/O cards<br>
Network Control (IRIS-Net) Yes<br>
Network Interface Ethernet-10/100 MBit/s, RJ-45<br>
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)<br>
Power Supply 100 - 240 VAC, 50/60 Hz<br>
Sample Rate 48 kHz internal<br>
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)<br>
Signal-to-Noise Ratio (A-weighted) 115 dB<br>
Total Harmonic Distortion 0.01 %<br>
Height 2RU 88.1 mm (3.47“)<br>
Width 483 mm (19.02“)<br>
Depth 381 mm (15“)<br>
Weight Net 7.37 kg (16.25 lbs) <br></p></td><td>
<p>Info
</p><p>
The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus. Features: - 12 Inputs / 6 Outputs - 6 Balanced Mic/Line Inputs - 4 Unbalanced, Mono-Summed RCA Input Pairs - S/PDIF Input - Microphone Gain per Channel - Pre-Configured Architecture - Two Configurable Input Insert Positions - One Configurable Output Insert Position - AutoWarmth per Output Zone - Link Bus - Comprehensive Signal Metering - Front Panel LCD - 9 User-Specified Front Panel Control - Optional ZC Controllers - Ethernet Control - Serial Control - Third Party Control - Wizard-Driven Configuration
</p>
</td><td>
<p>Ψηφιακός μίκτης - επεξεργαστής matrix. Δέχεται έως 8 mic/line inputs και 8 εξόδους. Διαθέτει DSP και επιτρέπει τηλεφωνικό Paging. Υπάρχει δυνατότητα αυτόματου ελέγχου στάθμης εκπομπής σύμφωνα με τον θόρυβο περιβάλλοντος. Συναργάζεται με Η/Υ για τον προγραμματισμό και τη ρύθμισή του. Κατάλληλο για εγκαταστάσεις σε Meeting rooms, Εκκλησίες, συνεδριακές αίθουσες, restaurant κλπ.</p></td><td>
<p>
CobraNet is a network technology for multichannel transmission of digital audio data. The CM-1 is a compact interface module for NetMax to allow connection to a CobraNet network, which allows the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio output.
</p>
<p>
</p>
<p>
* Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications.<br>
* 100BASE-TX ethernet interface; 100Mbit/s full-duplex Ethernet interface; IEEE 802.3u compatible.<br>
* Secondary 100BASE-TX Ethernet interface. Second Ethernet interface for the connection of a redundant network to establish fault tolerant systems. Internal audio output interface for the transmission of 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length<br>
* Internal audio input interface for receiving 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length.<br>
* Control, monitoring, configuration, and firmware updates via Ethernet protocol.<br>
* Status LEDs. Link, activity, fault, and CobraNet conductor status indication via Ethernet connectors. <br>
<br>
<br>
</p></td><td>
<p>The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.<br> <br> The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled<br> microphone gain allows adjustment of microphone gain per channel.<br> <br> The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.<br> <br> A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.<br> <br> The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.<br> <br> Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.<br> <br> All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).<br> <br> ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m. </p>
<p> </p>
<p>SPECIFICATIONS:</p>
Front Panel LED Indicators
<p>Per Output:6 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters</p>
<p>Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute</p>
Analog Inputs:
<p>12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input</p>
<p>Type:Euroblock (Mic/Line), RCA (Source)</p>
<p>Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered</p>
<p>Impedance (RCA):>25kΩ Unbalanced, RF Filtered</p>
<p>Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA</p>
<p>CMRR:> 40dB, typically >55db @ 1kHz</p>
<p>Mic Pre Gain:30 to 60dB</p>
<p>Mic Input Noise (E.I.N.):< -118dBu, 22Hz-22kHz, 150Ω Source Impedance</p>
<p>Mic Phantom Power:+15VDC</p>
ANALOG OUTPUTS
<p>Number of Outputs: 6 Total</p>
<p>Type:Electronically Balanced, RF Filtered Euroblock</p>
<p>Impedance:120Ω Balanced, 60Ω Unbalanced</p>
<p>Max. Output Level:+20dBu</p>
A/D PERFORMANCE
<p>Type: dbx Type IV™ Conversion System</p>
<p>Dynamic Range line: >113dB, A-weighted, >110dB unweighted</p>
<p>Type IV dynamic range:<br> >119dB, A-weighted, 22kHz<br> BW: >117dB, unweighted, 22kHz BW </p>
<p>Sample Rate: 48kHz</p>
D/A PERFORMANCE
<p>Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW</p>
SYSTEM PERFORMANCE
<p>Dynamic Range: >110dB A-weighted, >107dB unweighted, 22kHz BW</p>
<p>THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain</p>
<p>Frequency Response: 20Hz – 20kHz, +/- 0.5dB</p>
<p>Interchannel Crosstalk: >80dB typical</p>
<p>Crosstalk input to<br> output: >80dB</p>
<p>Propagation Delay 0.8 msec</p>
POWER REQUIREMENTS
<p>Operating Voltage: 100-240 VAC, 50/60Hz</p>
<p>Power Consumption: 27 Watts</p>
<p>BTU:</td></tr><tr class= "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.