Content |
dbx 1261 Overview
The ZonePRO 1261 from dbx is a digital zone processor that features twelve-channels of input and six-outputs. The unit is suitable for installation in restaurants, fitness centers, nightclubs and any other situation that requires multiple-zone control of audio sources with paging features. The ZonePRO 1261 has no front panel control and requires a computer for initial set-up.
The processor provides two balanced inputs on Euroblock terminals that are selectable as line or microphone level (with phantom power) along with eight pairs of analog RCA line inputs, with each pair internally summed to mono. An RCA coaxial S/PDIF digital input is also available. Outputs are available via Euroblock terminals and can be configured as either stereo or mono. A DB-9 connector is located on the front panel for connecting to a computer.
The included Windows based control software communicates with the unit via RS-232 or Ethernet. Processor blocks can be switched in or out of a chain and include input gain, high-pass filtering, parametric EQ, compression, limiting, gating, AGC, ducking, de-essing, AFS (Advanced Feedback Suppression), notch filters, signal routing, band-pass filtering, delay and polarity. An AutoWarmth module provides gentle bass boost compensation as signal levels are lowered.
The ZonePRO 1261 really shines when utilized with optional remote wall-mount controllers that can be positioned within the various zones. The wall-mounts are able to provide local volume control or scene selection, dependent on the type of controller installed. A built-in real-time clock can provide programmable system changes throughout the day or week. All program memory is non-volatile, ensuring program security in the event of power failure or computer malfunction.
Note:
Stereo sources and stereo output can be configured using the control software, but input channels and number of zones available will be reduced correspondingly.
Twelve-channel input, six-output zone processor with no front panel control
Note:
Each pair of RCA inputs is internally summed to mono. To maintain a stereo source, two sets of inputs need to be used
Processing blocks available on both inputs and outputs
Up to six zones can receive independent audio sources, with paging priority
Note:
Number of zones available will depend on whether mono or stereo output channels are required, with zones available decreasing by two for every stereo channel
Local zone control is available utilizing the optional WC series of wall-mounted controllers
Microphone input can have AFS (Advanced Feedback Suppression) inserted with fixed or live filter response
“Autowarmth" module provides a bass-boost to low level signals
AGC (Automatic Gain Control) maintains even levels
Other dynamic DSP includes compression, limiting, noise gating and ducking
Includes band-pass and crossover filters, notch filtering and parametric EQ
Security lockout
Computer control via RS-232 and Ethernet
An analog input bus allows inputs from one unit to be sent to a another unit for application scalability
Frequency Response |
20Hz to 20kHz, +/-0.5dB |
Dynamic Range |
>110dB A-weighted, >107dB unweighted |
Inputs |
Balanced Microphone and Line on Euroblock 16 x RCA phono (analog) 1 x RCA coaxial S/PDIF (digital) |
Outputs |
Euroblock (6-outputs) |
Input Impedance |
Euroblock: >50kΩ balanced, >25kΩ unbalanced, RF filtered RCA: >25kΩ unbalanced, RF filtered |
Output Impedance |
Balanced: 120Ω Unbalanced: 60Ω |
Maximum Input Level |
Mic/Line: +20dBu RCA: +12dBu |
Maximum Output Level |
+20dBu |
Sample Rate |
48kHz |
Phantom Power |
+15V |
Crosstalk (Main Outputs) |
>80dB |
THD + N |
0.003% typical at +4dBu @ 1kHz, 0dB gain |
System Requirements |
For ZonePRO software: 1GHz or faster processor Windows 2000/XP 256MB RAM (512MB recommended) 1024 x 768 or higher screen resolution |
Dimensions (WxDxH) |
19 x 5.75 x 1.75" (483 x 146 x 45mm) |
Weight |
6.8 lbs (3.1 kg) |
In the Box
- dbx ZonePRO 1261 - 12-Input / 6-Output Digital Zone Processor without Front-Panel Control
| 8-ZONE MUSIC AND ANNOUNCEMENT CONTROL SYSTEM ZONE8 is PROEL's answer for general or zone-selectable announcements and program material. It can manage up to 8 zones and can be configured to use a single amplification system for program material and announcements, or separate amplification for each. The ZONE8 accepts input from up to 18 different microphone control bases connected through a CAT5 interface, can be configured to accept announcement input from telephones through the internal exchange, and can be easily interfaced with alarm systems.
Main features: - 5 selectable program material inputs: Tape, CD, Tuner, AUX1, AUX2 - Level control for announcement inputs - Program material level control - Program material routing selectors for each zone - 'BUSY' LED indicators for active announcements in each zone - Priority microphone input for emergency announcements. |
CobraNet is a network technology for multichannel transmission of digital audio data. The CM-1 is a compact interface module for NetMax to allow connection to a CobraNet network, which allows the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio output.
* Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications.
* 100BASE-TX ethernet interface; 100Mbit/s full-duplex Ethernet interface; IEEE 802.3u compatible.
* Secondary 100BASE-TX Ethernet interface. Second Ethernet interface for the connection of a redundant network to establish fault tolerant systems. Internal audio output interface for the transmission of 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length
* Internal audio input interface for receiving 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length.
* Control, monitoring, configuration, and firmware updates via Ethernet protocol.
* Status LEDs. Link, activity, fault, and CobraNet conductor status indication via Ethernet connectors.
|
The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus. The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel. The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required. The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port. Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control. All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m.
SPECIFICATIONS:
Front Panel LED Indicators
Per Output:6 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
Analog Inputs:
12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input
Type:Euroblock (Mic/Line), RCA (Source)
Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered
Impedance (RCA):>25kΩ Unbalanced, RF Filtered
Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA
CMRR:> 40dB, typically >55db @ 1kHz
Mic Pre Gain:30 to 60dB
Mic Input Noise (E.I.N.):< -118dBu, 22Hz-22kHz, 150Ω Source Impedance
Mic Phantom Power:+15VDC
ANALOG OUTPUTS
Number of Outputs: 6 Total
Type:Electronically Balanced, RF Filtered Euroblock
Impedance:120Ω Balanced, 60Ω Unbalanced
Max. Output Level:+20dBu
A/D PERFORMANCE
Type: dbx Type IV™ Conversion System
Dynamic Range line: >113dB, A-weighted, >110dB unweighted
Type IV dynamic range: >119dB, A-weighted, 22kHz BW: >117dB, unweighted, 22kHz BW
Sample Rate: 48kHz
D/A PERFORMANCE
Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW
SYSTEM PERFORMANCE
Dynamic Range: >110dB A-weighted, >107dB unweighted, 22kHz BW
THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: >80dB typical
Crosstalk input to output: >80dB
Propagation Delay 0.8 msec
POWER REQUIREMENTS
Operating Voltage: 100-240 VAC, 50/60Hz
Power Consumption: 27 Watts
BTU: |
Digital audio transfer of up to 32 IN/32 OUT channels
CobraNet (TM) is fully compliant with Ethernet, and is a highly practical solution for distributing audio and control data over a common Ethernet infrastructure. The NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet (TM) technology to transfer high-quality 20-/24-bit 48kHz digital audio over four-bundle* paths - in real time.
* One bundle contains 8 channels of 20-bit audio, or 7 channels of 24-bit audio.
MIDI, head amp remote(AD824) and amplifier control
The NHB32-C is designed to handle not only digital audio, but also control data as well. With this function, the unit can be used for one of three types of control*: MIDI, head amp remote (for the AD824 A/D converter) or for monitoring/control of PC-N power amplifiers connected to the ACU16-C.
* Only one control type can be used at a time.
Up to sixty-four channels of audio - with one Ethernet cable
CobraNet handles up to eight bundles of digital audio in multicast (one-to-all) mode on a single CAT-5/100Base-TX cable.Up to eight NHB32-C units can be networked, with each unit transferring four bundles and receiving four bundles, and 64 channels of digital audio can be picked up from any ACU16-C or NHB32-C connected on the network via CobraNet. A networked system with ACU16-C and NHB32-C is able to handle up to 64 channels of digital audio with CobraNet technology. Moreover, multicast and unicast (one-to-one) mode can be used in combination to optimize bandwidth, more than 64 channels of digital audio data can be transferred on a network system.
Line duplication for good reliable system
Primary and Secondary CobraNet (TM) ports are built into the system, providing an easy-to-use duplicate network for reliable operation. If one system fails, the other takes over seamlessly, ensuring absolutely stable performance.
|
Analog Inputs Modular
Analog Outputs Modular
Audio Network CobraNet CM-1 Module (optional)
Cooling Left-to-right, 3-stage fan
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
Digital Inputs Modular
Digital Outputs Modular
FIR-Drive Yes
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control) 3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact)3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS), DSP-2 Extension Module (3 dual core processors-1200 MIPS total) , 1 DSP per Audio Module (100 MHz, 100 MIPS) 1500 MIPS total without I/O cards
Network Control (IRIS-Net) Yes
Network Interface Ethernet-10/100 MBit/s, RJ-45
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply 100 - 240 VAC, 50/60 Hz
Sample Rate 48 kHz internal
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted) 115 dB
Total Harmonic Distortion 0.01 %
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 381 mm (15“)
Weight Net 7.37 kg (16.25 lbs)
|
Reviews
There are no reviews yet.