The P 64 is a modular, networkcompatible audio matrix including signal processing, system monitoring and remote operability.
4 Audio slots can be equipped with 8 channel audio-inpout or output-cards to meet customized requirements. The P64 includes integrated selfmonitoring and supports spare/redundancy concepts in security-relevant systems. Complete recall of stored parameters and confiurations is possible.
300 MIPS computing power – Expandable to 1900 MIPS
Ethernet Interface – Configuration and control via TCP/IP
CAN interface – Communication with up to 100 external devices (e.g. Dynacord PowerH and/or DSA ampifieres)
RS-232 interface – Connection of media controls and building control systems
CobraNet interface – optianal redundant network module
.<br> <br> ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m. </p>
<p> </p>
<p>SPECIFICATIONS:</p>
Front Panel LED Indicators
<p>Per Output:6 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters</p>
<p>Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute</p>
Analog Inputs:
<p>12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input</p>
<p>Type:Euroblock (Mic/Line), RCA (Source)</p>
<p>Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered</p>
<p>Impedance (RCA):>25kΩ Unbalanced, RF Filtered</p>
<p>Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA</p>
<p>CMRR:> 40dB, typically >55db @ 1kHz</p>
<p>Mic Pre Gain:30 to 60dB</p>
<p>Mic Input Noise (E.I.N.):< -118dBu, 22Hz-22kHz, 150Ω Source Impedance</p>
<p>Mic Phantom Power:+15VDC</p>
ANALOG OUTPUTS
<p>Number of Outputs: 6 Total</p>
<p>Type:Electronically Balanced, RF Filtered Euroblock</p>
<p>Impedance:120Ω Balanced, 60Ω Unbalanced</p>
<p>Max. Output Level:+20dBu</p>
A/D PERFORMANCE
<p>Type: dbx Type IV™ Conversion System</p>
<p>Dynamic Range line: >113dB, A-weighted, >110dB unweighted</p>
<p>Type IV dynamic range:<br> >119dB, A-weighted, 22kHz<br> BW: >117dB, unweighted, 22kHz BW </p>
<p>Sample Rate: 48kHz</p>
D/A PERFORMANCE
<p>Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW</p>
SYSTEM PERFORMANCE
<p>Dynamic Range: >110dB A-weighted, >107dB unweighted, 22kHz BW</p>
<p>THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain</p>
<p>Frequency Response: 20Hz – 20kHz, +/- 0.5dB</p>
<p>Interchannel Crosstalk: >80dB typical</p>
<p>Crosstalk input to<br> output: >80dB</p>
<p>Propagation Delay 0.8 msec</p>
POWER REQUIREMENTS
<p>Operating Voltage: 100-240 VAC, 50/60Hz</p>
<p>Power Consumption: 27 Watts</p>
<p>BTU:</td><td>
<p>Digital audio transfer of up to 32 IN/32 OUT channels
</p><p>
CobraNet (TM) is fully compliant with Ethernet, and is a highly practical solution for distributing audio and control data over a common Ethernet infrastructure. The NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet (TM) technology to transfer high-quality 20-/24-bit 48kHz digital audio over four-bundle* paths - in real time.
</p>
<p>
* One bundle contains 8 channels of 20-bit audio, or 7 channels of 24-bit audio.
</p>
<p>
MIDI, head amp remote(AD824) and amplifier control
</p>
<p>
The NHB32-C is designed to handle not only digital audio, but also control data as well. With this function, the unit can be used for one of three types of control*: MIDI, head amp remote (for the AD824 A/D converter) or for monitoring/control of PC-N power amplifiers connected to the ACU16-C.
</p>
<p>
* Only one control type can be used at a time.
</p>
<p>
Up to sixty-four channels of audio - with one Ethernet cable
</p>
<p>
CobraNet handles up to eight bundles of digital audio in multicast (one-to-all) mode on a single CAT-5/100Base-TX cable.Up to eight NHB32-C units can be networked, with each unit transferring four bundles and receiving four bundles, and 64 channels of digital audio can be picked up from any ACU16-C or NHB32-C connected on the network via CobraNet. A networked system with ACU16-C and NHB32-C is able to handle up to 64 channels of digital audio with CobraNet technology. Moreover, multicast and unicast (one-to-one) mode can be used in combination to optimize bandwidth, more than 64 channels of digital audio data can be transferred on a network system.
</p>
<p>
Line duplication for good reliable system
</p>
<p>
Primary and Secondary CobraNet (TM) ports are built into the system, providing an easy-to-use duplicate network for reliable operation. If one system fails, the other takes over seamlessly, ensuring absolutely stable performance.
</p></td><td>
<p>
The NAI48-ES is a digital audio network interface that uses the EtherSound network protocol. Digital mixing consoles such as the Yamaha PM5D, M7CL, or LS9 can be connected to AD8HR 8-channel microphone preamp/AD converter or DA824 DA converter units via the NIA48-ES for remote analog input or output interfacing on stage or wherever needed. This type of system eliminates noise problems that are unavoidable with conventional analog console plus multi-cable type setups, and dramatically reduces microphone cable length for superior sound quality. Cabling between the console and "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.