Content |
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 7 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 95 dB
- Frequency Range 70 - 5000 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.65“, 16.5 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.15 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.7 Ohm
- BL Product (BL) 13.5 N/A
- Diaphragm Mass inc. Airload (Mms) 25,3 grams
- Mechanical Compliance of Suspension (Cms) 0.24 mm/N
- Rms 3.38 Kg/s
- Electromagnetic Q (Qes) 0.32
- Mechanical Q (Qms) 3.1
- Total Q (Qts) 0.29
- Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
- Surface Area of Cone (Sd) 30.38“², 196 cm²
- Maximum Linear Excursion (Xmax)* 6.92 mm
- Xdamage** 15.7 mm
- Coil Inductance (Le) 0.46 mH
- Diaphragm mass (Mmd) 23.7 g
- Eta Zero 1.06 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
JBL 124-58001-00 Woofer from JBL for control 28 speaker. - JBL Control 28 Factory Speaker Woofer Part # 124-58001-00
- This is a complete brand new JBL, Control 28 woofer
- Voice coil: 1-1/2" (25mm)
- Diameter: 8-1/4" (210mm) 9-1/4" (235mm) diagonally
- Impedance: 8 ohm, DCR: 6 ohm
- Poly cone with rubber edge
- Fits JBL Driver and Cabinet Models:
JBL: Control 28, Control 28T, Control 28T60, Control 28WH, 123-10002-00, 1231000200124-58001-00, 1245800100
|
- 94 dB sensitivity 1 W / 1 m
- 250 W Power handling
- 2" voice coil
- Double treated cone for water protection
- Neodymium magnet system
- Tripie aluminum demodulating rings for ultra low distortion
- Optimal for compact 2-way systems
- Light weight carbon fibre diaphragm
|
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil for low Power Compression
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 6.5 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 150 W
* Maximum Power Handling**** 300 W
* Sensitivity (1W/1m) 94 dB
* Frequency Range 80 - 6300 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.53“, 13.5 mm
* Magnetic Gap Depth 0.31“, 8 mm
* Flux Density 1 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 76 Hz
* DC Resistance (Re) 5.8 Ohm
* BL Product (BL) 9.86 N/A
* Diaphragm Mass inc. Airload (Mms) 20.9 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2.11 Kg/s
* Electromagnetic Q (Qes) 0.59
* Mechanical Q (Qms) 4.72
* Total Q (Qts) 0.53
* Compliance Equivalent Volume (Vas) 0.42 ft³, 11.9 dm³
* Surface Area of Cone (Sd) 31“², 200 cm²
* Maximum Linear Excursion (Xmax)* 5.42 mm
* Xdamage** 12 mm
* Coil Inductance (Le) 0.55 mH
* Diaphragm mass (Mmd) 19.4 g
* Eta Zero 0.85 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
| The B&C Speakers 8NDL51-16 is an efficient and lightweight cast frame 8" neodymium driver. Its ventilated voice coil gap ensures long term power handling and reduced power compression, and a copper cap on the pole piece reduces inductance and extends high frequency response. The 8NDL51-16 is highly recommended for compact 2-way speaker systems or as the midbass/midrange element in high-output 3-way and 4-way designs.
- Great for line arrays and horn loading
- Neodymium magnet assembly
- Ventilated voice coil gap for reduced power compression
- Inductance-reducing copper cap on pole piece extends HF response
- 2" copper voice coil on polyimide former
- 400 watts continuous program power capacity
- 65 - 3,000 Hz response
|
Reviews
There are no reviews yet.