Content |
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 7 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 95 dB
- Frequency Range 70 - 5000 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.65“, 16.5 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.15 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.7 Ohm
- BL Product (BL) 13.5 N/A
- Diaphragm Mass inc. Airload (Mms) 25,3 grams
- Mechanical Compliance of Suspension (Cms) 0.24 mm/N
- Rms 3.38 Kg/s
- Electromagnetic Q (Qes) 0.32
- Mechanical Q (Qms) 3.1
- Total Q (Qts) 0.29
- Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
- Surface Area of Cone (Sd) 30.38“², 196 cm²
- Maximum Linear Excursion (Xmax)* 6.92 mm
- Xdamage** 15.7 mm
- Coil Inductance (Le) 0.46 mH
- Diaphragm mass (Mmd) 23.7 g
- Eta Zero 1.06 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 6.4 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 97 dB
- Frequency Range 80 - 6300 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.39“, 9.8 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.3 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 90 Hz
- DC Resistance (Re) 5.3 Ohm
- BL Product (BL) 13 N/A
- Diaphragm Mass inc. Airload (Mms) 23 grams
- Mechanical Compliance of Suspension (Cms) 0.14 mm/N
- Rms 1.53 Kg/s
- Electromagnetic Q (Qes) 0.41
- Mechanical Q (Qms) 8.5
- Total Q (Qts) 0.39
- Compliance Equivalent Volume (Vas) 0.29 ft³, 8.26 dm³
- Surface Area of Cone (Sd) 32.09“², 207 cm²
- Maximum Linear Excursion (Xmax)* 3.57 mm
- Xdamage** 10.65 mm
- Coil Inductance (Le) 0.41 mH
- Diaphragm mass (Mmd) 21.2 g
- Eta Zero 1.44 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2-way Systems
|
50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression
Compatible with NEXO PS8
- Specifications
- Nominal diameter200 mm (8.0 in)
- Nominal impedance8 Ω
- Minimum impedance6.6 Ω
- Nominal power handling *200 W
- Continuous power handling *400 W
- Sensitivity (1W/1m) *94.0 dB
- Frequency range65 - 3000 Hz
- Voice coil diameter51 mm (2.0 in)
- Winding materialCopper
- Former materialGlass Fibre
- Winding depth17 mm (0.65 in)
- Magnetic gap depth8 mm (0.31 in)
- Flux density1.05 T
- Design
- Surround shapeDouble Roll
- Cone shapeExponential
- Magnet materialNeodymium Inside Slug
- SpiderSingle
- Pole designStraight Pole
- Woofer cone treatmentTWP Waterproof Both Sides
- Recommended enclosure14.0 dm3 (0.49 ft3)
- Recommended tuning65 Hz
- Parameters *
- Fs66 Hz
- Re5.3 Ω
- Qes0.41
- Qms3.6
- Qts0.37
- Vas14.0 dm3 (0.5 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.0 %
- Xmax7.0 mm
- Xvar7.0 mm
- Mms28 g
- Bl12.4 Txm
- Le0.5 mH
- EBP160 Hz
- Mounting And Shipping Info
- Overall diameter225 mm (8.8 in)
- Bolt circle diameter210 mm (8.3 in)
- Baffle cutout diameter187.0 mm (7.4 in)
- Depth90 mm (3.5 in)
- Flange and gasket thickness11 mm (0.4 in)
- Air volume occupied by driver1.1 dm3 (0.04 ft3)
- Net weight1.8 kg (4.0 lb)
- Shipping units1
- Shipping weight2.2 kg (4.8 lb)
- Shipping box300x160x180 mm (11.8x6.3x7.1 in)
|
Recone kit for FPW8N8150
|
JBL 124-58001-00 Woofer from JBL for control 28 speaker. - JBL Control 28 Factory Speaker Woofer Part # 124-58001-00
- This is a complete brand new JBL, Control 28 woofer
- Voice coil: 1-1/2" (25mm)
- Diameter: 8-1/4" (210mm) 9-1/4" (235mm) diagonally
- Impedance: 8 ohm, DCR: 6 ohm
- Poly cone with rubber edge
- Fits JBL Driver and Cabinet Models:
JBL: Control 28, Control 28T, Control 28T60, Control 28WH, 123-10002-00, 1231000200124-58001-00, 1245800100
|
Reviews
There are no reviews yet.