Content |
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP55 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
Features |
---|
Compact, arrayable, 2 x 12" bandpass subwoofer system | 131 dB max SPL, 800 Watt AES | Equipped with RCF high power 2 x12“, 3" voice coil woofers | Extensive internal bracing, 8 x M10 mounting points | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille | Dedicated to permanent installation |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 131 dB | | System Sensitivity: | 97 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1600 | |
TRANSDUCERS |
---|
Woofer: | 2 X 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 8 x m10 mounting points, 2 x recessed | | Handles: | 2 seitlich | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 650 / 25.59 mm/inch | | Depth: | 580 / 22.83 mm/inch | | Net Weight: | 38 / 83.77 Kg/Lbs |
| Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
1600 W (peak), 133 dB peak SPL on the EKX-15S utilizing highsensitivity transducers designed and engineered by EV. Lightweight, compact 15-mm wood enclosure with internal bracing, and durable EVCoat finish. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two bars on the EKX-18S). M20 threaded pole mount plate.
Brand | ELECTRO VOICE | Model | EKX-15S | Part Number | F01U303366 | Speaker Type | Passive | Speaker Category | SubWoofer | Construction Material | Wooden Cabin | Total Power (Watt) | 400 | resistance (ohms) | 8 ohms | Woofer (inches) | 15 | dB (max spl) | 133 | Sensitivity (1W / 1m) | 95 | Frequency Response (Hz) | 40-300 | Weight (kg) | 24,9 | Color | Black | Application | Installation, Portable PA | Series | EKX series | Warranty | 5 Years |
|
The S8018 II high-efficiency subwoofer is the ideal low-frequency extension to complement RCF installed systems.
The low-frequency transducer is a hypervented vented, high excursion RCF Precision 18” woofer with a 4” inside/outside voice coil to minimize power compression and extend the life of the product. Using bass-reflex loading the subwoofer design ensures an efficient acoustic response down to 30 Hz. The Baltic birch plywood enclosure is painted with black, heavy duty, textured epoxy. The front is protected by a strong powder coated metal grille. The cabinet features two Neutrik Speakon™ connectors in a recessed input plate. A M20 pole mount adaptor is provided on the top of the cabinet, integrated hand carry points on the cabinet sides.
Features
- 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
- 137 dB maximum sound pressure level
- Response down to 30 Hz
- Rectangular box enclosure with protective metal grille
- 35 mm standard pole mount in top section of cabinet
- Baltic Birch cabinet painted with black, heavy duty, textured epoxy
- Integrated hand carry points
Acoustical Specifications
- Frequency Response -10 dB: 30 Hz ÷ 200 Hz
- Max SPL @ 1m: 137 dB
- System Sensitivity: 100 dB
- Nominal Impedance: 8 Ω
- Power Handling: 1500 W
- Peak Power Handling: 6000 W
- Recommended Amplifier: 3000 W
Transducers
- Woofer: 18" woofer, 4" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 1500 W AES
- Sensitivity: 100 dB
Input Section
- Input connector: Speakon NL4
Cabinet
- Cabinet Material: 15 mm birch plywood construction
- Handles: 2 on side
- Grille: Custom perforated steel grille
- Colour: Black, scratch resistant paint
Physical Specifications
- Height: 630 / 24.80 mm/inch
- Width: 530 / 20.87 mm/inch
- Depth: 770 / 30.31 mm/inch
- Net Weight: 43 / 94.60 kg/lbs
|
Reviews
There are no reviews yet.