JBL Stage A100P 10″ (250mm) 300W Powered Subwoofer

• frequency response: 35-150 Hz
• 150-watt RMS amplifier (300 watts peak power)
• 10" polycellulose woofer
• bass-reflex design with rear-firing tuned ports
• rear-mounted volume, crossover, phase, and power controls
  • continuously variable low-pass 50-150 Hz crossover
  • phase switch to acoustically match the subwoofer's output to your main speakers
  • main power on/off switch plus auto standby/on mode
• line-level/LFE input
• removable grille
• detachable power cord
• 335 x 380 x 340mm
• weight: 13,6 kg

• Powered subwoofer
• Grille
• 6' AC power cord
• 4 Spike feet
• Owner's Manual

Product Series     Subwoofers
Speaker Type     Subwoofer
Frequency Range (+/-3 dB) [Hz]     28 - 190
Maximum SPL [dB]     112
Crossover Frequency [Hz]     40 - 120 Hz
Low Frequency Driver     1 x 12" long stroke  Polymere Aluminimum
Enclosure Type     Bass Reflex
Bass Reflex Tuning Frequency [Hz]     36.0
Max. Amplifier Power Output [RMS watt]     220
Continous IEC Power Output [RMS watt]     170
Input Impedance [Ω]     25K
Connection input(s)     Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding     No
Recommended Placement     Floor
Near wall or corner
Recommended Distance From Wall [cm]     > 5
Functions     Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W]     250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm]     370 x 340 x 380
Weight [kg]     14.7
Accessories Included     Manual
Rubber Bumpers
Spikes M6
Finish     Black Ash Vinyl
Light Walnut Vinyl
White Vinyl

Length    No
Accessories    Mic, mic stand, remote control
Amplifier    360 watts Dynamic/180 watts RMS Power
Auto On/Off    Yes
Cabinet Design    Extended Excursion Down-firing port
Color    Black Ash Wood Grain
Dimensions: (H/W/D)    14.5" x 13.25" x 14.875" (36.8 x 33.7 x 37.8 cm)
HiPass Crossover    80 Hz*, 6 dB/octave
LoPass Crossover    40-120 Hz adjustable (12 dB octave, 24 dB ultimate)
Phase Control    0, 90, 180, 270 Degrees
Removable Grille    Yes
Shipping Weight    31 lbs. (14 kg)
Size    No
Voice Coil    2-Layer copper
Warranty (N. Am.)    Two years (electronics & drivers - parts & labor)

Type     Advanced YST II and QD-Bass Subwoofer
Driver     25cm(10'') cone
Dynamic Power     250 W
Frequency Response     20-160 Hz
Advanced YST     Advanced YST II
QD-Bass Technology     Front-firing
High-Efficiency Power Amplifier     Yes
Linear Port     Yes
BASS (Bass Action Selector System)     Yes
Standby Power Consumption     0.3 W
Dimensions (W x H x D)     380 x 368 x 420 mm
Weight     18.5 kg

Subwoofer
Driver     25 cm (10”) cone
Output Power     250 W
Frequency Response     20–160 Hz
Advanced YST     Yes
High-Efficiency Power Amplifier     Yes
Twisted Flare Port     Yes
BASS (Bass Action Selector System)     Yes
Auto Standby     Yes
Standby Power Consumption     0.3 W
System Connector     Yes
Dimensions (W x H x D)     350 x 366 x 420 mm; 13-3/4” x 14-3/8” x 16-1/2”
Weight     18 kg; 39.7 lbs.

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)