Content | LD Systems ZONE 624 4-Zone Mixer
The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.
The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.
The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.
- Type: stereo
- Number of Zones: 4 (Master, Zone A-C)
- Installation Height: 3U
- Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
- Frequency Response: 20 - 40.000 Hz
- Microphone Channels: 2 (with phantom power 12 V)
- Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
- Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
- Microphone Channels Display Elements: On-LED
- Microphone Channels Input Impedance: 4 kOhm
- Microphone Channels Input Sensitivity: 4.5 mV
- Microphone Channels THD: 0,08 %
- Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line 4: Line, Input 6: Line/FOH
- Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
- Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
- Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
- Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
- Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
- Line Channels THD: 0,02 % (Phono 0,05%)
- input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
- Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
- Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
- Master Display Elements: 2 x 10 segment level meter
- Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
- Zone Output Connections: XLR (balanced), Terminal Block
- Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
- Zone Display Elements: 5-segment level meter
- Zone Output Levels: 24 dBu (balanced/ unbalanced)
- Output Connections Rec: 2 x RCA
- Headphone Output: 1
- Headphone Out Port: 6.3 mm jack stereo
- Headphone Output Controls: Cue Volume
- Headphone Output Voltage: 2,5 V 32 Ohm
- Additional Inputs: 2 (Emergency Input, Output Mute)
- Additional Input Connections: Terminal Block
- Additional Input Controls: Level Emergency Input
- Emergency Input Sensitivity: 5 V
- Additional Controls: power switch
- Additional Display Elements: Power-LED
- Operating Voltage: 220 - 250 V AC, 50 Hz
- Power Socket: IEC power socket
- Power Consumption (max.): 25 W
- Fuse: T 500 mAL / 250 V
- Dimensions (W x H x D): 485 x 132 x 210 mm
- Accessories included: terminal blocks, power cable, operating instructions
|
Power Output Level R-150 PLUS
STEREO
8ohm(T.H.D 0.05%) 50W+50W
4ohm(T.H.D 0.05%) 75W+75W
BRIDGED MONO
8ohm(T.H.D 0.05%) 50W
8ohm(T.H.D 0.5%) 170W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
| L1800 600W-600W 4ohm (360W-360W 8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation. |
Power Output Level R-300 PLUS
STEREO
8ohm(T.H.D 0.05%) 170W+170W
4ohm(T.H.D 0.05%) 250W+250W
BRIDGED MONO
8ohm(T.H.D 0.05%) 460W
8ohm(T.H.D 0.5%) 500W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
| • Gain settings at backside
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 2 Mic, 11 Line inputs
The IMIX-7.3 is a compact installation mixer with zone control. It has exact the same functionality as the IMIX-7.1 but each input on the IMIX-7.3 can be routed to the desired output. This function makes it possible to control 3 areas with different music, sound level and EQ settings.
Specifications Input channels: 2 x Microphone, combo XLR/Jack
11 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master Balanced, XLR
1 x REC output, RCA
1 x Headphones, 6.3mm Jack
Master EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Mic EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8
The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications.
The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions.
TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
Mono input channels, line
6
Mono line input connectors
2 x 6.3 mm TS
Mono line input type
Electronically balanced
Stereo Line Input Channels
1
Stereo Line Input Connectors
2 x XLR
Stereo Line Input Type
Electronically balanced
Input impedance
(balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s)
Max. input level
+ 21 dBu
Nominal working level
-10 dBV - +4 dBu
Mono output connectors
2 x 6.3 mm TS
Mono output type
Electronically balanced
Stereo output connectors
1 x XLR
Stereo output type
Electronically balanced
Output impedance
(balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s)
Max. output level
+22 dBu
Frequency response
5 - 40000 Hz
Controls
Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6
Indicators
In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Mains connector
IEC power connector
Accessories (included)
Power cord
|
Reviews
There are no reviews yet.