| Content | TECHNICS SL-1210 GR Direct Drive Turntable WITH 2M QUINTET BLUE CARTRIDGE
The directly driven Technics SL-1210GR has an extremely high quality core and brushless motor for a vibration-free drive. The Technics SL-1210GR becomes a real heavyweight thanks to the superbly crafted 2-layer sandwich chassis and the heavy-duty aluminium die-casting plate, which is rubber-coated inside for resonance damping. High-quality RCA sockets and a connection for the power cord make the hearts of HiFi fans beat faster.
The high-end turntable is equipped with the medium-heavy, S-shaped aluminium arm - including removable headshell with SME connection. The tonearm is light and easily height-adjustable.
Extreme robustness, fast start-up times and the easy assembly of different pickups are still the hallmarks of Technics turntables today. Older records are also reproduced in an impressive width.
A beautifully designed bonnet with the legendary arch over the tonearm is also included.
Features Technics SL-1210 GR
- Technology for high rotational stability
- Ironless direct drive motor
- High precision motor control
- Vibration tolerant construction
- Vibration absorbing platter plate
- Robust housing construction
- Silicone rubber cushioning feet
- High quality components
- Highly sensitive tone arm
- Gold plated connectors
TECHNOLOGY FOR ROTATIONAL STABILITY
- Coreless Direct Drive Motor
- High-Precision Motor Controller
CONSTRUCTION FOR VIBRATION TOLERANCE
- High-dampening Turntable Platter
- Rigid Cabinet Construction
- Silicon Rubber Insulator
HIGH QUALITY PARTS
- High Sensitive Tonearm
- Gold--plated Detachable Terminals
TECHNICS DEFINITIVE DESIGN
TURNTABLE SECTION
- Type: Direct Drive Manual Turntable
- Turntable Speeds: 33 1/3, 45, 78 r/min
- Adjust Range: ±8%, ±16%
- Starting Torque: 2.2 kg･cm
- Build-up Characteristics: 0.7 s. from standstill to 33 1/3 r/min
- Wow and Flutter: 0.025% W.R.M.S.
- Rumble: 78dB (IEC 98A Weighted)
- Turntable Platter: Aluminum die-cast
Diameter：332mm
Weight：Approx. 2.5kg (Including rubber sheet)
TONEARM SECTION
- Type: Universal, Static Balance
- Effective Length: 230mm • Overhang: 15mm
- Tracking Error Angle:
Within 2° 32\' (at the outer groove of 30cm record)
Within 0° 32\' (at the inner groove of 30cm record)
- Offset Angle: 22°
- Arm Height Adjustment Range: 0 - 6mm
- Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
- Head Shell Weight: Approx. 7.6g
- Applicable Cartridge Weight Range:
[without auxiliary weight] 5.6 - 12.0g (14.3 - 20.7g (including head shell))
[with auxiliary weight] 10.0 - 16.4g (18.7 - 25.1g (including head shell))
- Cartridge Mounting Dimension: JIS 12.7mm, interval • Head Shell Terminal Lug: 1.2mmφ 4-pin terminal lug
TERMINALS
- Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
GENERAL
- Dimensions (W x H x D): 453 x 173 x 372 mm
- Weight: Approx. 11.2kg
| The AT-LP5 direct-drive turntable brings advanced technology and sleek, contemporary styling together for performance that looks as good as it sounds. Born of Audio-Technica’s rich analog heritage, the AT-LP5 incorporates a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. It comes outfitted with a lightweight (10 g) AT-HS10 headshell and high-performance AT95EX Dual Moving Magnet stereo cartridge, created specifically for this turntable.
Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5 turntable is a class leader in limiting low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, high-torque motor, ensuring stable, on-axis rotation at 33-1/3 or 45 RPM. The platter is topped by a 5 mm thick rubber damping mat that improves low-frequency reproduction.
The AT-LP5 features a built-in switchable phono/line preamp that enables it to be connected directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The turntable is also equipped with a USB output for direct connection to a computer, and comes with PC- and Mac-compatible Audacity® software that lets you convert your records to MP3, WAV or other digital audio file formats.
-
- Direct-drive, high-torque motor
-
- Fully manual operation with two speeds: 33-1/3 and 45 RPM
-
- Exclusive AT95Ex Dual Moving Magnet stereo cartridge with replaceable stylus
-
- Lightweight AT-HS10 headshell
-
- J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
-
- Switchable built-in pre-amplifier enables connection to components with or without a dedicated phono input
-
- Anti-resonance, die-cast aluminum platter
-
- Heavy rubber damping mat for improved low-frequency reproduction
-
- Sleek, matte black finish
-
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable, and Audacity recording software for MAC or PC
- Included dust cover and mounting hardware
| Type |
2-speed, fully manual operation |
| Motor |
DC motor |
| Drive Method |
Direct drive |
| Speeds |
33-1/3 RPM, 45 RPM |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.6 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 3.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
Computer interface - USB 2.0 compliant Windows XP, Vista or MAC OS X |
| Power Supply Requirements |
120V AC, 60 Hz |
| Power Consumption |
11 W |
| Dimensions |
450.0 mm (17.72“) W x 352.0 mm (13.86“) D x 157.0 mm (6.1“) H |
| Weight |
10.5 kg (23.1 lbs.) |
| Accessories Included |
AT95EX Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software; cartridge alignment and overhang adjustment template; dust cover with mounting hardware |
| Reloop RP-7000 MK2 Overview
The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME).
The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.
Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
- Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation
- Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Height-adjustable tonearm base (VTA) and anti-skating control
- Satin aluminum material used for tonearm
- Adjustable pitch scale for precise adjustments
- Easily replaceable, freely rotatable LED needle light in aluminum design
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 to 6 seconds)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
- Precision manufactured, die-cast aluminum turntable
- Rubber inlays to reduce vibrations and background noise
- Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range ±8%, ±16%, ±50%
- Additional start/stop button for vertical positioning
- Reverse Function: switch for forward and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no ground required)
- Removable mains and cinch cable
- Shock-absorbing feet to insulate against vibrations
| Cardan bearing with zero-mass tracking force setting by a
high-precision torsion spring.
Removable headshell with 1/2 inch fixing holes. Adjustable
tracking force and anti-skating.
Headshell made of carbon fiber for special rigid torsion.
Chassis technology
Solid wooden console. Floating sub-chassis.Vibration
-damped aluminum turntables with anti-static felt mat.
Drive technology
Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone
arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back
archived discs with a rotational speed of 78 Upm.
Delivered with magnetic pick-up OMB 10.
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes.
Tone arm technology:
Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber.
Chassis technology:
Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat.
Drive technology:
Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge.
Specifications:
- Speed r/min.: 33/45/78
- Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DIN
- Rumble-to-noise ratio: 48 dB
- Rumble-noise ratio: 72 dB
- Cartridge system: OMB 10
- Frequency Response: 20 Hz - 22 kHz
- Depth sensing capability (300 Hz): 70 µm at 315 Hz
- Dimensions (WxHxD): 440 x 119 x 360 mm
- Weight: 5,43 kg
- Colour: black / silver
- Power supply: 12V DC, 150 mA
|
- Accurate playback
- Direct-drive motor
- Vertical tracking
- Adjustable insulator feet
- Solid construction
- Removable dust cover
General
- Colors Dark ebony
- Dimensions 500 x 394 x 185mm (W x D x H)
- Weight 18.5 kg
- Power Supply AC 100-240V, 50/60Hz
- Power consumption <4W
- Stdby Power consumption Less than 0.3W
- Carton maximum Dimensions 615 x 515 x 335 mm (W x D x H)
- Carton Weight 24.0 kg
- What's in the box Platter mat, Dust cover, Power cable, RCA cable and ground cable, Headshell, Overhang gauge, Screw set for cartridge mount (10, 13, 18mm), 2 x Cartridge spacers (1 mm), 2 x Plastic Washer, Screw driver, Counter weight, Sub-counter weight, Denon EP adapter/weight
| Play your favorite records--anywhere!
The Numark PT Touring turntable is a classically-styled suitcase unit that recalls the popular portable turntables from the past. PT Touring has a rugged case with a handle so you can carry it anywhere. It plays all your 33 1/3, 45 and 78 RPM records, comes with a 45 RPM adapter, and it has built-in stereo speakers for convenient listening without needing to connect external speakers. In addition, it has RCA outputs for simple connection to home audio equipment and a convenient Auto-Stop feature kicks in when it reaches the end of the record. Plus with its USB port, included USB cable and downloadable EZ Vinyl/Tape Convertersoftware, converting analog records into digital files for archiving on your computer is a snap.
PT Touring far surpasses the old suitcase turntables in versatility, however. It can also operate on its own built-in rechargeable battery—which means you can enjoy your records even if youʼre not near a wall plug.
- 3-speeds (33 1/3, 45 and 78 RPM)
- Built-in stereo speakers
- 1/8" headphone jack
- 1/8" Aux input
- Built-in rechargeable Li-On battery
- Line level RCA outputs
- EZ Vinyl/Tape Converter software converts records to digital files via USB
|
Reviews
There are no reviews yet.