| Content |
The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently..
* 0 dB = 1 V | Power Source | +24 V DC, -24 V DC, +6 V DC | | Current Consumption | 35 mA (at +24 V DC), 35 mA (at -24 V DC), 60 mA (at +6 V DC) | | Output | 2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins) | | Frequency Response | 20 - 20,000 Hz, +1, -3 dB | | Total Harmonic Distortion + N | 0.005% (at 1 kHz, 20 - 20,000 Hz BPF, 5 V output, 10 kΩ load) | | S/N Ratio | Over 73 dB (at 20 - 20,000 Hz BPF) | | Residual Noise | Under -91 dB (at 20 - 20,000 Hz BPF, VOL: -70 dB) | | Cross Talk | Over 87 dB (at 20 kHz) | | D/A Converter | 24 bit DAC | | Sampling Frequency | 48 kHz | | Tone Control | Bass: ±12 dB (at 100 Hz)
Treble: %%p12 dB (at 10 kHz) | | Parametric Equalizer | 10 bands, Frequency: 20 - 20,000 Hz, 31 steps, Variable range: ±12 dB,
Q: 0.3 - 5 | | Speaker Equalizer | 15 (compatible with TOA speakers only) | | High-pass Filter | -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps | | Low-pass Filter | -12 dB/oct, Variable frequency range: 4,000 - 20,000 Hz, 8 steps | | Compressor | Depth: 1 - 5 | | Delay | 0 - 40 ms (1 ms step), maximum 40 ms (CH 1 + CH 2), mixer mode only | | Operating Temperature | -10℃ to +40℃ | | Finish | Panel: Aluminum, hair-line | | Dimensions | 35 (W) × 78 (H) × 91.5 (D) mm | | Weight | 82 g | | Accessory | Removable terminal plug (3 pins) …2, Module mounting screw …2 |
|
The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
toa-at-100upr Build-in Attenuator with Relay
Toa - 100V installation
Build-in Attenuator with Relay 100 W / 100 V
|
The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.
| Power Source | 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system) | | Current Consumption | 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected) | | Frequency Response | 200 Hz - 15 kHz | | Distortion | 1 % or less | | S/N Ratio | 55 dB or more | | Microphone | Unidirectional dynamic microphone with talk key, compressor (on/off switchable) | | Volume Control | Microphone volume control, Buzzer volume control | | Connection Cable | Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal | | Maximum Cable Distance | Total 800 m (874.89 yd) | | No. of Connectable RM-320F | Max. 3 units | | Operation | Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch | | Indicator | Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator | | Operating Temperature | -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F) | | Operating Humidity | 5 % to 95 %RH (no condensation) | | Finish | ABS resin, blueish gray (PANTONE 538 or its equivalent) | | Dimensions | 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“) | | Weight | 1.1 kg (2.43 lb) (with wall mounting bracket unit) | | Accessory | Wall mounting bracket unit …1, Wall mounting screw …2 |
|
| | - AUTOMATIC CHARGING Tapered charging circuitry charges your backup batteries without risk of overcharging. - EASY BATTERY MONITORING Integrated digital volt meter and digital ampere meter allow you to monitor the status of your batteries. | | | | | | | PB-607 | | Battery Requirement | 24V DC | | Starting Current | 3A Max. | | Charge Complete Voltage | 27.3V ±10% | | Operation Temperature | -10℃~+40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Power Consumption | 130W | | Weight(SET) | 7Kg/15.4Ib | | Dimension(SET) | 482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in | | | |
|
| | - FAN FOR PA RACK Auto fan operates when the inside temperature of PA RACK goes up. - MANUAL OPERATING When it's manual mode, the fan operates always regardless of temperature. - AUTO OPERATING When it's auto mode, the fan operates at 35°C. | | | | | | PF- 602 | | Operation Selector Switch | Manual, Auto, Operating temperature | | Fan | 2 DC fans | | Power Source | 24VDC | | Power Consumption | 160mA | | Weight | 4Kg/8.8Ib | | Dimensions( W x H x D) | 482x 88 x 380 mm / 19 x 3.5 x 15in | | ※ Specifications and design subject to change without notice. | | | |
|
Reviews
There are no reviews yet.