ART CABLECOP CABLE TESTER

CableCOP - Cable Tester Overview

There are several types of cables used widely in pro audio ? mic cables and
patch cords with 2 or 3 conductors, instrument cables with 2 conductors, basic
speaker cables with 2 conductors and MIDI cables comprised of DIN5 connectors
using 2 conductors.
The CableCOP features a full selection of standard pro audio connectors for testing
all such cables. LEDs on the CableCOP link its various connector terminals and will
only illuminate when the connected ?cable? completes a circuit. As a result you?re
able to tell, at a glance, which cables need to be repaired. Sometimes the problem
can be the cable itself. An LED may also fail to illuminate if a 3-conductor cable
has been wired out-of-phase. As an example, if the Tip of one 1/4? TRS plug on a
(balanced) patch cable were soldered to the same cable conductor as the Ring or
Sleeve of the other 1/4? inch TRS plug.

CableCOP - Cable Tester Specifications:

Power Requirements 9V Battery (included)
Dimensions 3.75x2.5x1.5 inches (90mm x 63mm x 40mm)
Weight 1lb (454g)

• Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
• Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
• Super-easy operation with intuitive LED display
• Continuity check and intermittent contact detection

• Phantom-power and ground-shield check
• Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Operates with 2 AA size batteries (not included)
• Designed and engineered in Germany

Minirator MR1 is the powerful analog audio generator providing a comprehensive
set of analog audio test signals required in a professional audio environment.
This handy audio generator enables you to stimulate any analog device with a
broad range of appropriate signals like sine wave, pink noise, white noise,
sweeps and many others, for performance checking, maintenance and repairs.
Convenient, reliable and optimized - Minirator fits into your pocket as well as in
your budget.
 
Product-details
Signals:
? Sine Wave
? Square Wave
? Frequency Sweep
? White Noise
? Pink Noise
? Polarity Test Signal

Features:
? 20Hz to 20kHz, adjustable
  in 1/3rd octave steps
? Level adjustable
? Low distortion

User's Manual

• Solid metal housing
• Powered by a 9-V block battery
• Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
• Additional continuity tester with measuring probes
• Optical display and buzzer

Minilyzer ML1 is the state-of-the-art analog audio meter that fits
into the palm of your hand.
It provides you with a comprehensive set of functions essential
for the analysis of professional audio systems.The powerful Minilyzer
continuously measures the audio signal and displays the desired
results with all complementary information on an illuminated hi-res
graphical LC-Display.
The Minilyzer and the MiniSPL form a comprehensive integrating
sound level meter.
MiniLINK, the USB interface for the Minilyzer allows documentation
and data acquisition of all ML1 functions in conjunction with the easy
to use MiniLINK PC application. MiniLINK supports online data logging
up to several days.
Product-details

Measurement functions:
Level RMS, Relative
Sound Pressure Level
Distortion Analyzer (THD+N), k2 - k5 harmonics
VU & PPM Meter
Speaker Polarity Test(for all speaker types)
Signal Balance Error
Frequency-/Time-Sweep Recording
1/3rd Octave Spectrum RMS & SPL
Scope

• 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
• 0.1dB resolution updated every 0.5 seconds
• Auto ranging or manual range selection
• ʽAʼ & ʽCʼ frequency weighting
• Fast or slow response filters
• 42mm LCD display with quasi-analogue bargraph and function Indicators
• Bargraph in 1dB steps updated every 40ms
• Max hold function to display the highest recorded value
• Min/max memory since power on or last reset
• Low battery indicator
• Auto power off
• Analogue output AC: 0.707 Vrms (at full scale)
• Supplied with battery