Acoustic Amp Modeler/Direct Recording Preamp/DI Box Analog modeling acoustic guitar preamp/stompbox with DI recording output This BEHRINGER product has been designed to compete head to head with leading products on the market Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp Ultra-musical 3-band […]
Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼” TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.
User’s Manual
Weight
0.50 kg
Reviews
There are no reviews yet.
Be the first to review “BEHRINGER ADI21 ACOUSTIC DRIVER PEDAL” Cancel reply
Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Analog modeling acoustic guitar preamp/stompbox with DI recording output
This BEHRINGER product has been designed to compete head to head with leading products on the market
Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
Super-high impedance to retain maximum signal integrity and dynamics
Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode
Output available on ¼'' TS or balanced, gold-plated XLR connectors
Ground lift switch eliminates typical ground loop problems
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Great Sound, Naturally
By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you donʼt want to use the emulation feature, the ADI21 also functions as a superb active DI box. The BLEND control allows you to mix the amount of modeled tone with your instrumentʼs normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.
EQ and More…
Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4” TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).
Value
Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. Try the V-TONE ACOUSTIC ADI21 at your local BEHRINGER dealer and find out just how affordable great acoustic sound can be.
User's Manual
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
Nominal Input Level
-20 dBu
Input Impedance
1 M ohms
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level
-92 dBu (IHF-A, Typ.)
Connectors
INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V)
Power Supply
DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw
50 mA (DC 9 V)
Accessories
Dry Battery 9 V type (6F22/9 V)
Options
AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U)
Size and Weight ( incl. battery )
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight
420 g
0 lbs. 15 oz.
Features The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
Classic "blues" guitar tones with tube amp simulation
Warm distortion and overdrive
Responds to nuance and volume changes
AC adaptor or 9V battery operation
BOSS 5-year warranty
Experience true analog delay and vintage slap-back echo that rivals any tape delay
This BEHRINGER product has been designed to compete head to head with leading products on the market
Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
Blue status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic On/Off switch for highest signal integrity in bypass mode
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Analog at its Finest
Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command.
Easy to Operate
The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode. You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included).
Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay...
Product Features:
Shape your sound and eliminate feedback with 7 bands of equalization
This BEHRINGER product has been designed to compete head to head with leading products on the market
Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic On/Off switch for noise-free operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
How the specific frequency bands of the BEQ700 can shape your sound
50 Hz (sub-bass)
Boost: To thicken up sub-bass content, which is mostly felt rather than heard
Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power
120 Hz (soft bass)
Boost: To enhance the lower end of the bass spectrum
Cut: To reduce the tendency of low frequency content to overwhelm a small room
400 Hz (hard bass)
Boost: To enhance the "hard” bass punch of fundamental tones
Cut: To reduce punch for better linkage with the kick drum
500 Hz
Boost: or Cut: To control bass clarity and warmth
800 Hz
Boost: To add an aggressive edge to the overall bass sound
Cut: For reducing somewhat nasal or horn-like content
4.5 kHz
Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate harshness
10 kHz
Boost: To bring out the upper harmonics and add edge to the overall bass tonality
Cut: Apply a cut to reduce harsh high-frequency content or hiss
User's Manual
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
Input Impedance
1 M ohms
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level
-93 dBu (IHF-A, Typ.)
Connectors
INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V)
Power Supply
DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.