CROWN XTi-6002 2x2100W-4Ω POWER AMPLIFIER

Original price was: €2,718.03.Current price is: €2,294.00. incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Specifications: • Power output: 3,000 watts 2 ohm stereo per ch, 2,100 watts 4 ohm stereo per ch, 1,200 watts 8 ohm stereo per ch, 4,200 watts 8 ohm bridge-mono, 6,000 watts 4 ohms bridge-mono • Sensitivity (for full rated power at 4 ohms): 1.4V RMS • Frequency response (at 1 watt, 20 Hz – […]

 

Read more

Specifications: • Power output: 3,000 watts 2 ohm stereo per ch, 2,100 watts 4 ohm stereo per ch, 1,200 watts 8 ohm stereo per ch, 4,200 watts 8 ohm bridge-mono, 6,000 watts 4 ohms bridge-mono • Sensitivity (for full rated power at 4 ohms): 1.4V RMS • Frequency response (at 1 watt, 20 Hz – 20 kHz): +0 dB, –1 dB • S/N Ratio (below rated 1 kHz power at 8 ohms):  103 dB (A weighted) • T.H.D.: 500 • Crosstalk (below rated power): 20 kHz – 1 kHz: >70 dB • Input impedance (nominal): 20k ohms balanced, 10k ohms unbalanced • Maximum input signal: +22 dBu typical • AC Line voltage and frequency configurations: 120 VAC 60 Hz • AC Line current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; no more than 180 watts at idle • Operating temperature: 0°C to 40°C at 95% relative humidity (non-condensing) • Dimensions: 19″ W x 3.5″ H x 16.2″ D • Net weight: 24 lbs. (13.6 kg).
Weight 13.60 kg

Reviews

There are no reviews yet.

Be the first to review “CROWN XTi-6002 2x2100W-4Ω POWER AMPLIFIER”

Your email address will not be published. Required fields are marked *

Quick Comparison

CROWN XTi-6002 2x2100W-4Ω POWER AMPLIFIER removeQSC CMX-2000V POWER AMPLIFIER 2x2000W RMS @ 4Ω, 2x2500W RMS @2Ω removeYAMAHA T-5N Power Amplifier 2x1350W removeLD SYSTEMS LDSP6K SP 6K - PA Power Amplifier 2 x 2950 W 2 Ohm removePOWERSOFT T904 DSP+D Power amplifier 4 x 2000W 4Ohm Dante removePEAVEY IPR2 5000 Power Amplifier remove
NameCROWN XTi-6002 2x2100W-4Ω POWER AMPLIFIER removeQSC CMX-2000V POWER AMPLIFIER 2x2000W RMS @ 4Ω, 2x2500W RMS @2Ω removeYAMAHA T-5N Power Amplifier 2x1350W removeLD SYSTEMS LDSP6K SP 6K - PA Power Amplifier 2 x 2950 W 2 Ohm removePOWERSOFT T904 DSP+D Power amplifier 4 x 2000W 4Ohm Dante removePEAVEY IPR2 5000 Power Amplifier remove
ImagePowersoft T904 DSP+D Power amplifier 4 x 2000W 4Ohm Dante
SKUxti-6002CMX-2000VH060.00040LDSP6KE018111PVY.2245.0004
Rating
Price Original price was: €2,718.03.Current price is: €2,294.00. incl. GR VAT2,253.94 incl. GR VAT Original price was: €4,199.00.Current price is: €3,879.00. incl. GR VAT Original price was: €2,850.76.Current price is: €2,309.11. incl. GR VAT Original price was: €5,450.00.Current price is: €5,116.00. incl. GR VAT Original price was: €1,550.00.Current price is: €1,395.00. incl. GR VAT
Stock

In stock

Available on backorder

Only 5 left in stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderOnly 5 left in stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.
ContentSpecifications: • Power output: 3,000 watts 2 ohm stereo per ch, 2,100 watts 4 ohm stereo per ch, 1,200 watts 8 ohm stereo per ch, 4,200 watts 8 ohm bridge-mono, 6,000 watts 4 ohms bridge-mono • Sensitivity (for full rated power at 4 ohms): 1.4V RMS • Frequency response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB • S/N Ratio (below rated 1 kHz power at 8 ohms):  103 dB (A weighted) • T.H.D.: 500 • Crosstalk (below rated power): 20 kHz - 1 kHz: >70 dB • Input impedance (nominal): 20k ohms balanced, 10k ohms unbalanced • Maximum input signal: +22 dBu typical • AC Line voltage and frequency configurations: 120 VAC 60 Hz • AC Line current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 15.3A; no more than 180 watts at idle • Operating temperature: 0°C to 40°C at 95% relative humidity (non-condensing) • Dimensions: 19" W x 3.5" H x 16.2" D • Net weight: 24 lbs. (13.6 kg).

Stereo Mode Ratings (Both Channels Driven):

    8 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 1050W
    - EIA 1 kHz, 0.1% THD: 1100W
    4 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 1600W
    - EIA 1 kHz, 0.5% THD: 2000W (1% THD)
    2 ohms:
    - EIA 1 kHz, 1% THD: 2500W
    70V Direct Drive:
    - EIA 1 kHz, 1% THD: 2500W
    100V Direct Drive:
    - EIA 1 kHz, 1% THD: 1000W

Bridged Mono Mode Ratings/Specifications:

    8 ohms:
    - FTC 20 Hz - 20kHz, 0.1% THD: 3200W
    - EIA 1 kHz, 0.1% THD: 3600W
    4 ohms:
    - EIA 1 kHz, 1% THD: 5000W
    70V Direct Drive:
    - EIA 1 kHz, 1% THD: 5000W
    100V Direct Drive:
    - EIA 1 kHz, 1% THD: 3600W
    Signal to Noise, 20Hz-20kHz, 0.1% THD, 8 Ohms: > -100dB
    Input Sensitivity @ 8 Ohms: 1.42V (+5.3 dBu)
    Voltage Gain @ 8 Ohms: 64x (36 dB)
    Output Circuitry: 3-tier Class H
    Power Requirements (120V):
    - 1/8 power pink noise at 4 ohms: 13.9A
    - 1/3 power pink noise at 4 ohms: 26.9A
    Power Requirements (230V):
    - 1/8 power pink noise at 4 ohms: 7A
    - 1/3 power pink noise at 4 ohms: 13.5A
    Distortion (SMPTE-IM):

Model T5n
Product Type Power Amplifier
Output Power (W) 1kHz THD+N=1% (120V)
2Ω per channel 2500
4Ω per channel 2200
8Ω per channel 1350
4Ω bridge 5000
8Ω bridge 4400
Output Power (W) 1kHz 20mS burst (120V)
2Ω per channel 3400
4Ω per channel 2200
8Ω per channel 1350
4Ω bridge 6800
8Ω bridge 4400
SN ratio (20Hz-20kHz) 107dB
THD+N 20Hz-20kHz, Half Power RL-4Ω, 8Ω
Intermodulation Distortion 60Hz: 7kHz, 4:1, Half Power 0.1%
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (Max) 0dB
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (TYP) 0dB
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (MIN) 6dB
Channel Separation (Half Power RL=8Ω,1kHz Att. max input 600Ω shunt) 70dB
Residual Noise Att,min 20Hz-20kHz(DIN AUDIO) -70dBu
Damping factorRL=8Ω 1kHz 800
Voltage Gain Att.max 26dB
Maximum Input Voltage +24dBu
Input Impedence 20kΩ (balance) 10kΩ (unbalance)
Controls Specifications
Front Panel POWER switch(push on/push off) attenuator (31 position) x2
Rear Panel MODE switch (STEREO/BRIDGE/PARALLEL) X1; HPF switch (20Hz/OFF 12dB/oct) x1; AMP ID switch (6PDIP)x1
Connectors Specifications
Input XLR-3-31 type/ch; Euroblock connector (balance)/ch
Output SPEAKON/ch, 5way biding postx1
Date Port RJ45x2
Indicators Specifications
Power/Standby x1 (Green/Orange)
Remote x1 (Green)
Protection x1 (Red)
Temp x1 (Red) heatsink temp 85°C
Signal x2 (Green)
Mute x2 (Red)
Clip/Limit x2 (Red)
Load protection POWER switch on/off mute; DC-fault: power supply shutdown / do not return automatically
Cooling Variable-speed fan: x2
Power requirements 120V/60Hz
Weight 14.0 kg
Dimensions (W x H x D) 480 x 88 x 456mm (2U)

The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youʼre starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youʼll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.

  • Model Name: SP6K
  • Output Power 1 kHz, 500
  • Crosstalk (20 Hz - 20 kHz): > 75 dB
  • Voltage Gain (selectable): 26 / 32 / 38 dB
  • Input Sensitivity: 5.0 / 2.5 / 1.3 V
  • Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection)
  • Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
  • Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
  • Connectors:
    • Input: 2 x XLR
    • Line Output: 2 x XLR
    • Speaker Output: 2 x Speakon
  • Power Supply: 230 V - 50 Hz
  • Dimensions (W x H x D): 483 × 88.9 × 310 mm
Manufacturer POWERSOFT
Warranty 4 Years Gurantee
Channels Four Channel
Resistance ohms 8Ω / 4Ω / 2Ω
DSP Yes
Power (8 ohms/Watt RMS) per channel 1600
Power (4 ohms/Watt RMS) per channel 2000
Power (2 ohms/Watt RMS) per channel 1800
Weight (kg) 7.8
  • 2900W RMS x 1 at 2 ohms
  • 1780W RMS x 1 at 4 ohms
  • 975W RMS x 1 at 8 ohms
  • 2525W RMS x 2 at 2 ohms
  • 1510W RMS x 2 at 4 ohms
  • 890W RMS x 2 at 8 ohms
  • 2 channel independent, fourth-order Linkwitz-Riley crossovers
  • DDT protection
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combination XLR 1/4 inputs
  • 4 pole twist lock output connectors
  • Ultra-light weight
  • Individual signal pass 1/4" jacks on each channel
  • LED illuminated
  • Standby, LED power present indication
  • Weight Unpacked: 6.2 kg
  • Weight Packed: 7.9 kg
  • Width Packed: 53.34 cm
  • Height Packed: 53.848 cm
  • Depth Packed: 15.24 cm
Weight13.60 kg33.10 kg14.00 kg8.60 kg7.8 kg6.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 13.60 kg
Weight 33.10 kg
Weight 14.00 kg
Weight 8.60 kg
Weight 7.8 kg
Weight 6.20 kg

Recently Viewed Products