| Content |
Expect nothing less than true versatality and pure tube tones in conjuction with modern features for recording and stage purposes. Make your choice and dedicate your amp to your style. Experience all the facettes of sounds at your fingertipps. Itʽs all right there. In the new ENGL Masterclass. Made in Germany!
two channels (Clean and Lead) with separated Gain controls
• built-in digital reverb (switchable)
• Mid-Scoop (switchable)
• 3 Band EQ
• Power Soak for 8 & 16 Ohm cabs (20W, 5W, 1W, Speaker Off)
• Lead Volume Control
• Line-out balanced (frequency compensated)
• FX Loop (switchable)
• Preamp: 2 x ECC83, Poweramp: 2 x EL84
| Palmer EINS - Amazingly versatile!
Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.
The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.
- 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
- 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
- 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
- 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.
- Type: head
- technology: Tube
- class: A
- power: 1 W
- Inputs: 1
- input connectors: 6.3 mm Jack
- Input impedance: 1 M ohm
- outputs: 4
- output connectors: 6.3 mm Jack
- output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
- Channels: 1
- Indicators: Power
- controls: Level, Tone
- FX loop: no
- Power supply: 230 VAC
- Power consumption: 10 W
- preamp tubes: ECC83
- power amp tubes: ECC82
- rectifier: solid state
- cabinet material: sheet steel
- Cabinet / Housing surface: powder coated / anodized
- width: 206 mm
- depth: 128 mm
- height: 108 mm
| EVOLUTION: No compromise, ultra low end, versatile ROCK/METAL amp. 4 channels lead to where no ENGL amp has gone before. The Sonic Evolution of ENGL sounds, from crystal clean to crispy crunch n tight fat rhythm to punchy lead sounds in conjunction with low bottom end to satisfy the needs of the modern guitarist. Rich harmonics and fast attack delivered by special built transformers to cut through on any stage or recording situation. |
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
The JVM Series 100-watt, valve-driven power stage is built on the classic design responsible for the legendary Marshall roar found in the JCM800, 2203 and "plexi" Super Lead amplifiers -- a timeless foundation for countless classic rock and metal guitar tones for over 4 decades. Featuring a quartet of EL34 valves, this peerless design has been expertly crafted to compliment the extraorinary wealth of tones found in the JVM.
Technical Info
Type: Head
Output (RMS): 100 watts
Channels: 4
Modes per Channel: 3
Independent Gain and Volume (per Ch): Yes
Independent Tone Network (per Ch): Yes
Independent Reverb Level (per Ch): Yes
Dual Programming Master Volumes: Yes
Silent Recording: Yes
Emulated Line Out XLR: Yes
Series FX Loop: Yes
Programmable Parallel/Series FX Loop: Yes
MIDI Presets: 128
Pre-Amp Valves: 4XECC83
Power Amp Valves: 1X ECC83, 4XEL34
6-way Programmable Footcontroller (Supplied) PEDL-00044
Dimensions (mm): 750 x 310 x 215
Weight (KG): 22
Speakers: No
|
Marshall 1987X-01 50W Guitar Amplifier
Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.
Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.
The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.
- Output: 50 Watts
- Pre-amp Tubes: 3 x ECC83
- Power Amp Tubes: 2 x EL34
- EQ: 3-Band
- Presence Control
|
Reviews
There are no reviews yet.