Content |
The Control 26-DT is a compact ceiling speaker assembly configured to install
into standard ceiling backcans designed for 200 mm (8 inch) speakers. High
power handling, wide frequency response and low distortion make the Control
26-DT ideal for sound systems requiring a higher fidelity sound, that integrates with many backcan designs.
* Transducer, Network and transformer.
* Fits standard backcans for 8-inch speakers.
* Wide coverage.
* Advanced crossover network provides even coverage throughout listening area.
* 60 Watt transformer for 70V or 100V lines.
* Coaxial 165 mm (6.5 inch) woofer with butyl rubber surround and 19 mm (¾ inch) titanium coated tweeter.
|
The TOA Electronics 5W Clean Room Ceiling Speaker is ideal applications include clean rooms, hospitals and laboratory
Rated Input5WRated Impedance100V Line: 2 kOhms (5W) 70V Line: 2 kOhms (2.5W)Sensitivity87 dB (1 W, 1 m)Frequency Response150Hz - 20kHzEnclosureCompletely sealed typeSpeaker Component8cm cone-type (vibration section: high molecular substance)Operating Temperature Range-20 deg. C to +60 deg. C / -4 deg .F to +140 deg. FChemical ResistanceResistive to formalin solvent and iodine liquid (disinfectant)FinishPanel: Allory-coated ABS resin Enclosure: ABS resin, off-white Punching net: Stainless steel Exposed fixing screw: Stainless steelDimensionsDia. x D: 4.57 x 4.33" / 116 x 110mm Fixing Holes: dia. 3.86" / 98mmWeight21.87oz / 620g
Μεγάφωνο οροφής 5W με μετ/στή 100V, κλειστού θαλάμου σχεδιασμένο για εργαστήρια ερευνών (χημικά, βιολογικά κ.λ.π.) & δωμάτια υπολογιστών. |
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low (Adjustable | 16Ω, 8Ω | Sound Pressure Level | 91dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: Balanced dome- type | Speaker Component | Low frequency: 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish Enclosure | Steel plate, plating | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 |
|
- Compact, high power handling.
- Completely sealed flush mounted high humidity area speaker.
- Plastic film diaphragm rated at 3W at 3.3k Ω and 1W at 10k Ω.
- Stainless steel punching net.
- ABS resin enclosure / Alloy coated ABS resin panel.
Specification |
| Rated Input | 3W, 1W | Rated Impedance | 3.3k Ω (3W), 10k Ω (1W) | Sound Pressure Level | 88dB (1W, 1m) | Frequency Response | 120 ~ 20,000Hz | Ambient Temperature | -10 ~ +60°C | Dimensions for Fixing Hol | ø150mm / Ceiling thickness; up to 50mm | Dimensions | ø180 x 10 (exposed section) + 110mm | Weight | 700g | Finish | Frame and case; ABS resin, Off-white / Punching net; Stainless steel. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | n/a | Rated Input | 6W (high impedance) | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16) | Continuous program | 18W (8), 12W(16) | Impedance | (100V Line) 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W) | Impedance | (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W),10kΩ (0.5W), 20kΩ (0.25W) | Impedance | (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W),10kΩ (0.06W), 20kΩ (0.03W) | Low (Adjustable) | 16Ω, 8Ω | Sound Pressure Level | 89dB (1W, 1m) | Frequency Response | 80 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: Balanced dome- type | Speaker Component | Low frequency: 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | Finish Enclosure | n/a | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | Artificial fiber, black | Dimensions | ø230 x 154 (D)mm | Weight | 1.5kg (including panel) | Accessories Panel | 1 | Ceiling reinforcement ring | n/a | Safety wire | n/a | Paper pattern | 1 | Option Anchor hanging bracket | n/a | Back can | HY- BC1 | Tile bar bridge | n/a | Trim ring | n/a |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low | (Adjustable) 16Ω, 8Ω | Sound Pressure Leve | 90dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component: High frequency | 12cm cone-type | Speaker Component: Low frequency | 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish | Enclosure: Steel plate, plating
Baffle: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net: Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 | Electronic controller | AC- 120C | Note | The F-122C must be used with an Electronic Controller AC-120. |
|
Reviews
There are no reviews yet.