| Content | User's Manual
Data sheet
The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.
The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 -120 Hz.
The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.
The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.
- Type: active
- Version: DSP-controlled
- Woofer size: 18“
- Woofer size: 457.2 mm
- Woofer magnet: neodymium
- Woofer brand: Faital Pro
- Woofer voice coil: 4 "
- Woofer voice coil: 76.5 mm
- Amplifier: Class D
- Power output (RMS): 2 x 700 W
- Frequency response: 30 Hz - 120 Hz
- Max. SPL (continuous): 126 dB
- Max. SPL (peak): 134 dB
- Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, short circuit, overvoltage
- Controls: Gain dB, DSP Preset, Ground Lift, DSP/Gain enable, Power
- Indicators: DSP/ Gain disable, Peak Limit, Signal, Operate
- Line inputs: 2
- Line input connectors: XLR
- Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
- Line output connectors: XLR
- Power supply: switching power supply
- Operating voltage: 180-264V ~ / 47-63 Hz
- Cabinet material: 18 mm plywood
- Cabinet surface: polyurethane
- Cabinet type: bass reflex
- Width: 510 mm
- Height: 700 mm
- Depth: 725 mm
- Features: 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters
|
| Manufacturer |
ITALIAN STAGE |
| Warranty |
2 Years Gurantee |
| Speaker Category |
SubWoofer |
| Speaker Type |
Active |
| Speaker Material |
Wooden Cabin |
| Speaker Power (Watt) |
350 |
| Woofer (inches) |
18 |
| dB (max spl) |
128 |
| Weight (kg) |
29 |
| Frequency Response (Hz) |
20 έως 120 |
| Color |
Μαύρο |
|
Features
- Powered horn-bass subwoofer system
– High output 18″ loudspeaker
– Polarity switch
– Filtered output defeat switch
– Variable 100 -160 Hz high-pass filter
– Gain control
The Avant 118A is a powered rear-loaded horn-bass subwoofer system designed to provide extended bass response for the Avant full-range cabinets.
A 1250 W Class D amplifier drives a D.A.S. 18LX log excursion bass loudspeaker. The 18LX loudspeaker incoporates a 4″ voice coil for high power handling and output.
The Avant 118A incorporates a 1250 W Class D amplifier with switch mode power supply (SMPS) and digital signal processing (DSP).The amplifier has a unique EQ switch which allows the user to select a Deep subbass response or a Loud bass response. The system includes two balanced inputs with stereo filtered output connections for satellite systems. The variable crossover ranges from 100 Hz-160 Hz and can be defeated to offer stereo "loop thru” connections. A gain control and polarity reverse feature increase user control over the system.
Technical Data
| Nominal LF Amplifier Power | 1250 W (Class D) | | Frequency Range (-10 dB) | Loud: 50 Hz – 142 Hz
Deep: 45 Hz -138 Hz | | Rated Peak SPL at 1 m | 136 dB | | Internal Crossover | Variable 100-160 Hz | | Connectors | INPUT: 2 x Female XLR
LOOP THRU: 2 x Male XLR
AC INPUT: PowerCon NAC 3
AC OUTPUT: Powercon NAC 3 | | AC Requirements | 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz | | Current Draw (1/3 power @ 230 V) | 2.7 A | | Enclosure Material | Birch Plywood | | Color/Finish | Black/Iso-Flex Paint | | Dimensions (H x W x D) | 84 x 60 x 65.5 cm
33 x 23.6 x 25.8 in | | Weight | 55 kg (121 lb) |
| The DXS 18 achieves best in class SPL of up to 136dB and delivers the lowest frequency response (down to 32Hz) in the lineup. Housed in a sturdy band-pass enclosure, the custom built 18” driver with a large 4-inch voice coil and a Class-D amplifier delivers 1020W of power with exceptional clarity and accuracy.
- Powered reflex subwoofer
- Woofer: 18" with 4" voice coil
- Ideal for low-frequency extension to all full-range loudspeakers
- Maximum SPL: 136 dB
- Frequency range (-10 dB): 30 to 150 Hz
- High-power 1600W Class-D amplifier module
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DXS18X) and wheel kit (SPW-1)
- DXS XLF subwoofers are driven by 96 kHz high-power DSP processors and utilize dynamic EQ
- Onboard D-XSUB LF processing provides total low-frequency management
- Normal mode: Set for ideally balanced low-frequency response
- Boost mode: Provides a tighter and more focused bass with some extra punch
- Xtended LF mode: Drops the low-end frequencies down even further for a large bottom end
- Cardioid mode:
- Works with two or more subwoofers
- Effectively decreases the sound pressure on stage while increasing the bottom-end output directed towards the audience
- Results in a much cleaner stage monitoring environment
- DSP protection functions for maximum output and component longevity
- Active subwoofers ensure the combination of transducer and amplifier are matched and optimized for the best possible performance
- During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
- Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha's DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability
PA Speaker
| Configuration |
Active Subwoofer |
| Enclosure Type |
Bass-Reflex Subwoofer |
| Total Power Capacity |
1600 W Peak
1200 W RMS |
| Amplifier Class |
Class-D |
Drivers
| LF Driver |
1 x 18" / 457.2 mm Woofer |
| LF Voice Coil |
4" / 101.6 mm |
| Magnet |
Ferrite |
Performance
| Frequency Range |
30 Hz to 150 Hz -10 dB |
| Maximum SPL |
136 dB |
| Max Input Level |
Line Input:
+24 dBu |
| I/O Impedance |
Input:
20 Kilohms |
Connectivity
| Audio I/O |
2 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
2 x XLR 3-Pin Male Balanced Output |
| USB |
1 x USB-A (External Memory, Host Connection) |
Signal Processing
| Maximum Sampling Rate |
96 kHz |
Power
| AC Input Power |
Universal:
100 to 240 VAC, 50 / 60 Hz |
| AC Power I/O |
1 x IEC (Locking) |
| Power Consumption |
40 W (Idle)
180 W (1/8 Power) |
Physical
| Mounting |
1 x 1.4" / 35 mm Pole Socket (Top)
1 x M20 Pole Socket (Top) |
| Handles |
1 x Each Side |
| Cooling |
Fan (Variable Speed) |
| Construction Material |
Plywood |
| Dimensions |
21.7 x 25.9 x 28.3" / 550 x 657 x 720 mm |
| Weight |
107.8 lb / 48.9 kg |
| -18" woofer (457mm), 8 Ohm
- Continuos power output: 500W RMS
- Frequency response: 30 - 200Hz +/-3dB
- SPL: 128dB continuos, 130dB peak
- XLR or Jack 6.3mm signal input
- XLR link output
- Volume control
- Adjustable frequency
- Phase selector
- Thermal protection, DC protection
- Wooden cabinet 15mm, painted
- Dimensions(W x D x H): 530*600*530mm
- Weight: 33kg | Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 600-watt RMS or 2400-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you\'re a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
- 18-inch subwoofer for powerful low-end up to 29 Hz
- 133 dB max. SPL and 2400 Watt peak power through highly efficient digital Class D power amplifier
- Optimized bass reflex ports
- DynX DSP with four application presets (three crossover frequencies, cardioid mode)
- Switchable signal polarity and adjustable delay line for up to 10 meters
- 2 x XLR/TRS "combo jack" inputs and 2 XLR Output
- 18 mm rugged plywood housing and heavy-duty grill
- 4 Aluminum handles with ergonomic rubber surface
- Securely stackable with four stacking-grooves
- M20 thread for distance pole
Product type
PA subwoofer
Type
Powered
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
100 mm
Amplifier
Class D
RMS
600 W
Peak power
2400 W
Frequency response (-10dB)
29Hz Preset depending
Max. SPL (peak)
133 dB
Protection circuits
Excursion Limiter , over voltage , over-current , Peak Limiter , thermal overload
Controls
Push encoder
Indicators
LC display
Line inputs
2
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 240 V
Power Consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
Width
626 mm
Height
672 mm
Depth
637 mm
Weight
44,3 kg
|
Reviews
There are no reviews yet.