Content | The LH offers the epitome of valve tone and live versatility. A reliable, gig ready head and cab combination with all of the sounds and features required to cover genres from Country to Metal.
The LH50 head offers independent Gain and Drive controls on each of itʼs two channels giving the player maximum tonal flexibility for a variety of performance styles.
Each of the LH50ʼs twin channels features their own dedicated drive control, three band EQ, plus global Reverb and overall Tone control.
The benefit of having a Gain on both channels is that even if you want to set one channel up clean you have the ability to add a little drive to it giving you that luxurious gently pushed valve amp sound. No need for a pedal in the front end! Wind the other channel up and hit it hard and the amp sings, rich with harmonics and defiantly screaming its heart out.
On the far right lies the master tone control. This is a very cool idea indeed and acts a lot like your guitars tone pot. This makes for some serious tonal tomfoolery.
The rear panel of the LH50 features an FX loop and the external speaker sockets.
Power: |
50 Watt |
Channels: |
2 |
Equalizer: |
Yes (Bass, Middle & Treble_ |
Inputs: |
FX Loop(s), Hi & Lo Jacks |
Outputs: |
Footswitch, Speaker connections |
Effects: |
Reverb, overall Tone control |
Valves: |
Premium EL34 |
Foot-switch: |
FS2 (Not included) |
Controls: |
Gain, 3 Band EQ/ each channel |
FX Loop: |
Yes |
Dimensions ( W x H x D ): |
556 x 246 x 262 |
Weight: |
14 Kg |
|
100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.
Features - Power rating: 100W
- Preamp: Digital Natural Harmonic Technology
- Power amp tubes: 4 x EL34
- Preamp topologies: 16
- Modulation effects: Chorus, Phaser, Flanger, Tremolo
- Delay effects: Hi-Fi Analog, Tape, Multi
- Reverb: Independent custom voiced
- Midi Control: Midi in, Midi Thru
- Stompware controller: supplied
- Emulated line out: XLR
- Headphone out: 1/4" jack
- Line in: 1/4" jack
- Preamp: 1/4" jack
- Effects loop: Serial / Parallel -10dBV / +4dB with mix control
- Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
|
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
Info
Marshall 2555X Silver Jubilee, all-valve electric guitar head, 100W, 2 channels, preamp tubes: 3x ECC83, power amp tubes: 4x EL34, 1x input, controls: input gain (push/pull: rhythm clip), lead master, output master, treble, middle, bass, presence, pentode/triode switching, FX loop, DI out, incl. footswitch (channel change), speaker outputs: 1x 16 ohms, 1x 8 ohms (or 2x 16 ohms) & 1x 4 ohms (or 2x 8 ohms), dimensions: 750 x 230 x 310mm, weight: 22,1kg
| Building on the overwhelming success of our acclaimed Dark Terror and Dual Dark amps, weʼve distilled thousands of customer demands into a pint-sized valve hybrid head – the Micro Dark. The Micro Dark shares the same intuitive Shape control combined with a new 12AX7-driven high gain preamp section which yields screaming dirty tones that make a mockery of its miniature frame. Like its bigger brothers, however, the Micro Darkʼs smoky black chassis and simple layout actually disguises its cunning versatility.
Of course, thereʼs plenty of gain on tap to satisfy even the most discerning devotee of distortion, but this little beast is by no means just a one-trick Metal monster! Beneath the menacing exterior youʼll find a rich and diverse pallette of classy and confident tones. From squeaky clean to brash and mean – whatever your style – youʼre gonna love this thing.
Other features include a transparent fully buffered effects loop and a headphone output with our popular CabSim circuitry. With the optional PPC108 cabinet, the Micro is an ideal practice rig… Plug into something a little larger, though, and you might find your new secret weapon in the studio! |
Marshall 1987X-01 50W Guitar Amplifier
Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.
Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.
The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.
- Output: 50 Watts
- Pre-amp Tubes: 3 x ECC83
- Power Amp Tubes: 2 x EL34
- EQ: 3-Band
- Presence Control
|
Reviews
There are no reviews yet.