Content |
- With improved 192 kHz sample rate for the best sound reproduction.
- Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) audio signals.
- Supports compressed 2-channel and multi-channel Dolby Digital and DTS audio signals.
- Ideal for presentation or distribution to another room.
- The optical (Toslink) digital audio splitter can split a single optical digital input to four outputs without delay or loss of quality.
- Supports the S/PDIF and Toslink standard.
Your TV has 1 Toslink output, but you use 2 amplifiers. This requires the Toslink cable to be split from 1 into 2. An additional amplifier could be, for example, a surround set, a sound bar of an amplifier in the kitchen.
Connections
|
|
Audio input |
1 x Toslink (optical) |
Audio output |
2 x Toslink (optical) |
Audio
|
|
Supported audio |
PCM2, Dolby Digital 5.1 and DTS |
Sample rate |
Up to 192 kHz |
General
|
|
Dimensions (h x w x d) |
24 x 46 x 46 mm |
Weight |
22 grams |
Ambient temperature |
+0 to +40 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Signal distributor. 1 stereo input / 4 stereo outputs or 1 mono input / 8 mono outputs
This audio distributor is very useful to supply several audio devices with only one audio source. Its 2 operating modes allow to work with mono or stereo signals. Output level can be controlled independently.
WD 421 adapts itself to work with different impedances, ensuring that output signal level is at least equal to input signal level. It avoids any undesired attenuation and features a LED vumeter to visualize the input signal level.
Audio signal distributor with 2 inputs and 8 outputs. Two operating modes: 1 stereo input with 4 stereo outputs. 1 mono input with 8 mono outputs. Adjusting Output level. Balanced LINK output for interconnecting several units. Individual gain control of each channel
Inputs: 2 x XLR3 female balanced. Outputs: 8 x XLR3 male balanced. Input sensitivity: 0 dBu. Max. level input: 22 dBu. Input impedance: 10 kohm. Level range: ? to - 12dBu. Frequency response: 20 Hz to 22 kHz. Distortion: 110 dBu. Noise and hum: < - 80 dB @ 20 Hz - 22 kHz. Crosstalk: < - 80 dB @ 20 Hz - 22 kHz. Output impedance: 120ohm. Main supply: 110 - 120 V / 220 - 240 V 50/60 Hz. Power consumption: 20 W. Dimensions (WxHxD): 483 x 44 x 220 mm. Weight: 2.75 kg. |
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
|
A passive dual channel line splitter that is mainly used to feed the left and right master outputs of a mixer into several inputs such as power amplifiers, recording machines etc. A specially designed audio frequency transformer maintains signal integrity and prevents ground loop hum. This unit also converts unbalanced signals into balanced signals and vice versa. Rugged diecast aluminium box.
Technical specifications:
2 channel micro splitter "1 into 3“, each channel with:
- Input: female XLR type with parallel male XLR Type
- Output 2 transformer isolated male XLR type outputs
- Transformer ratio 1 : 1 Nominal level: 0 dB, max. level +20 dB
- Nominal impedance input and output: 600 ohms
- Ground lift switch
| 1231 Dual 31-Band Graphic Equalizer
The dbx? 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.
SPECIFICATIONS:
INPUT |
Connectors: |
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
Type: |
Electronically balanced/unbalanced, RF filtered |
Impedance: |
Balanced 40 kOhm, unbalanced 20 kOhm |
Max Input Level: |
>+21dBu balanced or unbalanced |
CMRR: |
>40dB, typically >55dB at 1kHz |
OUTPUTS |
Connectors: |
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
Type: |
Impedance-balanaced/unbalanced, RF filtered |
Impedance: |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output Level: |
>+21dBu balanced/unbalanced into 2 kOhm or greater
>+18dBm balanced/unbalanced (into 600 ohm) |
SYSTEM PERFORMANCE |
Bandwidth: |
20Hz to 20kHz, +0.5/-1dB |
Frequency Response: |
50kHz, +0.5/-3dB |
|
+/-15dB range |
+/-6dB range |
Dynamic Range: |
109dB |
115dB |
Signal-to-Noise: |
90dB |
97dB |
THD + Noise: |
|
|
- Connect HDMI sources to your audio equipment, even if they lack a dedicated audio output (Apple TV 4, Chromecast, Wii U, media players).
- Listen to music (MP3, audio streams, radio channels) without requiring the TV being turned on.
- Versatile problem solver when connecting your audio equipment to your TV, monitor or projector.
- Determine your desired audio format using the unique EDID switch.
- Play the audio from your Smart TV applications (Netflix, YouTube) or built-in TV decoder on your home cinema set, audio amplifier or soundbar.
- Use your TV's Audio Return Channel (ARC) function, even when your audio equipment is not suitable for this.
Still want to connect your Apple TV 4, Google Chromecast or TV without an audio output to your audio equipment? You can with the Connect AE14.
This HDMI audio extractor with ARC allows you to extract audio from your HDMI source or TV and to forward it to the speakers of a home cinema set, audio amplifier or soundbar.
The products the Connect-series can be used if the inputs and outputs of equipment cannot be connected with each other by default.
Connections
|
|
AV input |
1 x HDMI |
AV output |
1 x HDMI |
HDMI cable length |
15 metres (max.) |
Digital audio output |
1 x Toslink (optical), 1x coaxial |
Analogue audio output |
1 x stereo 3.5 mm jack |
Video
|
|
Supported resolution |
Max. 2160@30Hz |
HDMI standards |
HDMI 1.4, HDCP, CEC, ARC, EDID, DVI, Deep Color 36-bit, 3D formats and x.v. Colour |
Video bandwidth |
10.2 Gbps |
Clock frequency |
300 MHz |
HDCP standards |
HDCP 1.4/2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 of 4:2:2 |
Colour depth |
Max. 36-bit |
Audio
|
|
Digital audio output |
DTS 5.1, Dolby Digital/AC3 and PCM 2.0 CH |
Analogue audio output |
2.0 CH |
General
|
|
Dimensions (h x w x d) |
20 x 70 x 68 mm |
Weight |
130 grams |
Ambient temperature |
+0 to +70 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Reviews
There are no reviews yet.